Since you have performed this work yourself, it is highly likely that you have a ground touching the neutral wire behind one of the two plugs that do not work. Remove the two non working plugs and inspect them for ground wire touching white wire where its bare, or touching screws. Count wires in boxes, hopefully there is two in the first, and one in the second. Anyway try that out and after you have both plugs out and hanging there, try to reset the gfi one more time. If this is to no avail, go and buy a power tester, or glow stick and check the wires at the gfi to verify that the line wires are indeed the line. Let us know what you found, we are curious of the solution. Good luck.....