Cleaning lower sprayer

Advertise with us
SpartanEpoxies
shop deals on amazon
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Blue Jay

Blue Jay

Well-Known Member
Joined
Jun 5, 2008
Messages
333
Reaction score
40
Looking for ideas to clean out deposits from city water in a lower sprayer arm on a Kenmore built in dishwasher. Daughter has had some luck using baking soda and vinegar but wondering if there is a better way.
Thanks
 
If you can take the arm out, soak it in vinegar. If that works through a little in with every load in the future.
 
Have you tried to run some CLR through it or as nealtw says remove and soak it in CLR?
Make sure to run an empty load before using for dishes again.
 
I suggested the CLR to her but have not heard back as to the results. Next time I go over if it is not working ok I will see about taking it out and trying the soaking followed by a bit of air to blow it out.
Thanks for the replies.
 
You must log in or register to reply here.

Latest posts

Back
Top