Ironhead83
New Member
- Joined
- Mar 13, 2010
- Messages
- 2
- Reaction score
- 0
I have a gas Ruud ugda-075c-er, about 20 years old. I understand that it is a pretty cheap unit, but I need to get a couple more years out of it if possible. Due to finances I need to make this a DIY job.
Sorry for my ignorance, but I need your help. When I try to turn on the heat all I can hear is a faint buzz from a black box directly below where the thermostat wires are connected. It is pretty cold so I am not sure if the AC would even work.
Any ideas; places to look for voltages etc.. I have a volt meter and limited skills and hopefully can find and replace the parts needed.
Thanks,
Rick
Sorry for my ignorance, but I need your help. When I try to turn on the heat all I can hear is a faint buzz from a black box directly below where the thermostat wires are connected. It is pretty cold so I am not sure if the AC would even work.
Any ideas; places to look for voltages etc.. I have a volt meter and limited skills and hopefully can find and replace the parts needed.
Thanks,
Rick