Some help with LEDs

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dkishton1486

Member
Joined
Jan 17, 2016
Messages
8
Reaction score
0
Hello all I replaced my mr11 halogen lights above my kitchen sink with some mr11 LEDs. The issue i have now is that the LEDs will flicker when turned on and will stop flickering if I plug in a halogen bulb. The power supply for the mr11 LEDs states "Power Supply: AC 12V & DC 12V/1.8W". What do I have to do to resolve this?
Thank You
 
I can get you a picture of the power supply if you need it

Something I have experienced with xenon is that if the power supply exceeds the load, in a disproportionate volume, they would flicker until the load was increased.

So, the cure may be to change the Halogen power supply to one closer to the 1.8w LED draw.
 
So since I have 2 of the LEDs on the same power supply do I still look for a 1.8v power supply?
 
Here is what I have now hooked up
647bb57042a31d02c6797234dbfd2497.jpg
 
Back
Top