jcorbin121
Member
- Joined
- Jan 28, 2011
- Messages
- 16
- Reaction score
- 0
I am remodeling master bath on 2nd floor. Current laundry is in basement, want to move the 220 and 110 circuits for the laundry up to 2nd floor. What I was thinking was:
- Would like to stack washer/dryer in current space where fiberglass shower stall is
- Will remove shower enclosure and remove any sheetrock
- Directly under master bath is powder room on 1st floor, will remove sheetrock on exterior wall and insulation
- Will drill up from first floor powder room to master bath
- Will drill down from powder room to basement
- Remove 3x3' of sheet rock in area where powder room is above basement and put in juncton box and pull romex back to that spot from current laundry
- Run romex from 2nd floor down to basement and connect at junction box
Is this a sound plan? Is there anything I should or shouldn't be doing ?? Additional issues?
Thanks for any thoughts!!
John
- Would like to stack washer/dryer in current space where fiberglass shower stall is
- Will remove shower enclosure and remove any sheetrock
- Directly under master bath is powder room on 1st floor, will remove sheetrock on exterior wall and insulation
- Will drill up from first floor powder room to master bath
- Will drill down from powder room to basement
- Remove 3x3' of sheet rock in area where powder room is above basement and put in juncton box and pull romex back to that spot from current laundry
- Run romex from 2nd floor down to basement and connect at junction box
Is this a sound plan? Is there anything I should or shouldn't be doing ?? Additional issues?
Thanks for any thoughts!!
John