Hello guys, first post so hope it goes ok. Want to fix some wiring in my basement after I divided a room into two rooms. I'm a little confused on how I should wire this up so I can separate the two light fixtures from one switch, to having the two light fixtures operate on their own separate switches (add another light switch). Right now both light fixtures are wired to one light switch, which turns both on. Since the room is divided and I will barely be in one of the rooms I thought why have the light on in that room, just have another switch to turn it on when need be. I haven't did much electrical work in the past, but I really want to give this a go and start it this weekend. I have attached a terrible drawing to show how the wiring is hooked up as of now. Try not to laugh at drawing, I know it's pathetic. The other thing is the power source first enters light fixture B and then everything if feed from their. I don't have an issue with the receptacles being wired the way the are, it works for my set up. I just want to have Light Switch A operate Light Fixture A and Light Switch B operate Light Fixture B, not both on one light switch. oh yes, I'm located in Toronto, Canada so I wanted to make sure all is do to code. I appreciate all feedback in advance, thank you.