Nope, different thing. My shower has a hot and cold knob, and a knob in the center that's bathtub when turned all the way to the right and shower when turned all the way to the left. That's the knob I had to remove to get to the diverter.
Is this the same thing to do with a pull down faucet? Mine is cheap plastic and the water control is not a hot and a cold. It is a rotatin temp. control above the faucet.
My problem is that the inner tube will not fully tighten onto the threaded adapter because of the hole created by the retainer ring screw. I must be doing something wrong because the instructions directed me to create this hole and clear out the excess plastic burr it created before installing the inner tube.
Enter your email address to join: