Originally Posted by Redbirdseven
Hi there ... Speedy Petey is right about the GFI circuits using the #12 wire but you need by code to have two separate GFI circuits in the Kitchen counter section. This is so if you have things like elec. frying skillets and crock pots and blenders and toasters and the like plugged in and running two more at the same time you can do so without tripping your breakers.
If I was doing the wiring I would vote for the separate runs of wire. If your panel will not hole the extra cir's well then it is time to up grade to a larger cir. panel
well I just had the panel upgraded.. I have a 1300 sq ft house and it it 100amp main breaker.
I have a 20 space breaker box and 6 are open right now. I am going to do a leg off for the garage, and just rewire the kitchen and try to get the bedrooms on their own, so I will use maybe 4 tandems (I was told 8 is the limit in that panel.)
But thanks for the thoughts... going to just start runnning wires I suppose....
I am sorry, but "flippers" drive me nuts; Just because some girl in Cali did it on this one show and made 100K, doesn't mean you can do a half-job and turn a profit