DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Carpentry and Woodworking > cabinet repainting/refacing

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 11-09-2010, 05:49 PM  
Junior Member
Join Date: Nov 2010
Location: Bellevue, wa
Posts: 1
Default cabinet repainting/refacing

Looking at repainting/refacing woodgrain kitchen cabinets. The plan was to sand them smoooth until smooth to elminate woodgrain and paint that surface.
Wanting to check on an idea. You know how concrete levelers poured into concrete will settle itself "level" filling in the crack or hole to even with the surface, with a little smoothing of course. Is there a product or procedure in which one might apply it to the woodgrain surface and then the medium would fill in the wood grain "evenly" and then sanding that saving the effort and hours to sand out the woodgrain itself?

Trying to "remove" the wood grain for "full" flat finish and repaint, no wood or grain showing. hopefully find a way to do it without hardships of sanding down and out the woodgrain itself, understanding that sanding will be involved

Thank you,

Last edited by jeffreyarch; 11-09-2010 at 07:05 PM.
jeffreyarch is offline  
Reply With Quote
Old 11-12-2010, 03:07 PM  
Junior Member
Join Date: Jul 2010
Posts: 12
Default cabinets

That's an interesting question. I've never heard of that type of "leveling" product, but a good paint store might know of one, if it exists. I did see one good how to on painting cabinets...hope this helps.

Painting Kitchen Cabinets

Allison1888 is offline  
Reply With Quote
Old 11-15-2010, 10:43 AM  
Junior Member
Join Date: Nov 2010
Location: San Antonio, Texas
Posts: 6
Default Give this a shot

Target's HSF5100... a clear water-based polyurethane acrylic filler.

It also comes in burnt sienna, raw umber, and black -

Here's the website:
Rhonda523 is offline  
Reply With Quote
Old 11-17-2010, 10:03 PM  
Join Date: Nov 2010
Location: Chestertown, Maryland
Posts: 44

Have you looked at new doors? Check out If you just need something to do. Leveling and sanding and leveling and sanding is a project if you do it correctly. Try to spray the finnish. If you do woodworking, make your own doors. Good Luck. Hope you don't have many to do. G
gmicken is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Alternative to Cabinet Refacing: Can this be done? line429 General Home Improvement Discussion 8 11-10-2014 08:37 AM
Porch Repainting 1victorianfarmhouse Painting Forum 6 04-02-2013 07:56 AM
repair / repainting of outside woodwork DIYnewbie Carpentry and Woodworking 1 05-26-2007 01:24 PM
cabinet refacing question pahomeowner Carpentry and Woodworking 6 04-03-2006 12:09 AM

Newest Threads