DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > Replacing Aluminum Siding Panels




Reply
 
Thread Tools Search this Thread Display Modes
Old 02-06-2011, 08:47 PM  
maddy
Junior Member
 
Join Date: Feb 2011
Location: chicago, IL
Posts: 5
Default Replacing Aluminum Siding Panels

Hi Everyone,

Been reading over the posts and I don't see one that applies to my situation. I have old aluminum siding that was damaged in a recent storm. The insurance company is only paying to have some of the panels replaced. I went to Menards and they have the siding panels I need. I have found a reputable painter to paint the panels and the rest of the siding once the repair is complete. The siding that is damaged happens to be the bottom half, not the top. I am having a most difficult time trying to find someone willing to do the repair of the siding. I am near Chicago, any suggestions on who might be able to help? Thanks in advance.



__________________
maddy is offline  
 
Reply With Quote Quick reply to this message
Old 02-06-2011, 10:43 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,706
Liked 921 Times on 822 Posts
Likes Given: 1585

Default

Did you ask the insurance company to refer some one



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 02-06-2011, 10:52 PM  
havasu
on permanent vacation
HRT_LIFETIMESUPPORTER.png
 
havasu's Avatar
 
Join Date: Oct 2010
Location: Southern California, CA
Posts: 2,260
Liked 109 Times on 92 Posts
Likes Given: 32

Default

I believe if the insurance company receives a few letters from contractors who refuse to repair rather than replace, you might get the entire siding replaced, which would be a win-win for you.

__________________
havasu is offline  
 
Reply With Quote Quick reply to this message
Old 02-07-2011, 04:49 PM  
maddy
Junior Member
 
Join Date: Feb 2011
Location: chicago, IL
Posts: 5
Default

Thanks for the reply. Yes I did but they said they only know those who would change out the entire siding. This is frustrating...

__________________
maddy is offline  
 
Reply With Quote Quick reply to this message
Old 02-07-2011, 05:32 PM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

There is no way to just remove and replace a bottom piece of aluminum siding. You have to start at the top and work your way down removing it all, then replace starting at the bottom. Trying to remove and replace a piece in the field of the wall will just bend the metal.
Now if it was vinly siding you could replace any piece you wanted to in about 5 min.

__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Old 02-07-2011, 07:24 PM  
maddy
Junior Member
 
Join Date: Feb 2011
Location: chicago, IL
Posts: 5
Default

Now I am officially bummed.... Hope someone else has some input on this. Would really like to think some of the siding could be replaced by pieces instead of doing a whole job.

__________________
maddy is offline  
 
Reply With Quote Quick reply to this message
Old 02-08-2011, 08:35 AM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

Well someone may come up with another idea but ask them what they do for a living and watch out for the ones that say "I've never done it before, but this is how you can try doing it" A big majority of what my company does is siding. We have removed miles of aluminum siding so it can be replaced with vinyl and have been there and done that when it comes to trying to just fix it.
Many times when we tear down an old porch someone cut around the old siding and it now needs to be patched up. It just bends and can not be relocked like vinyl can.
We can stip a whole wall 50' X 10' in less then hour with just two people with nothing more then a flat bar and a hammer.

__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Old 02-16-2011, 08:17 AM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

Malco SRT2 NA SideSwiper II SideSwiper II Siding Removal Tool
This is the tool the other poster is talking about.
Here's what's going to happen as you try to get the tool in it's going to scratch the finish, once you get it in there's just no way on aluminum to get the row to unlock without bending it, even if you did the trick will be to get the new piece to lock back into the piece above it.
With vinyl you can bend it, beat and bang on it to get it in with out any damage because it just springs back into place, with aluminum once it's bent near the lock there's just no way to get it back in shape.
__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Old 02-18-2011, 11:34 PM  
maddy
Junior Member
 
Join Date: Feb 2011
Location: chicago, IL
Posts: 5
Default

Thanks Joe for the info.

__________________
maddy is offline  
 
Reply With Quote Quick reply to this message
Old 02-24-2011, 11:05 PM  
Roofmaster417
RFN-4A-LVN
 
Roofmaster417's Avatar
 
Join Date: Jun 2010
Location: Purgatory, 417,573,636,314
Posts: 42
Likes Given: 1

Default

If the siding is old it might be a chore finding replacement pieces.I deal with insurance work 85% of the time.Your adjuster is passing the buck so to speak IMO.Your siding installer should 1st take a section to the adjuster and have him run it thru ITEL.That is a siding locator that is used by the insurance companies to determine if the siding is even available.Most insurance companies will replace "Post to Post" on a elevation that has a certain amount of hailstrikes.Typically the 8" "Frost" color with a woodgrain is impossible to find.If the siding cannot be matched exactly according to exposure and grain (pattern) then the ENTIRE elevation is replaced.Post to Post is an area that sustained damage within the corner posts.I cannot understand why contractors who are in the siding "Business" turn away repairs.Simple repairs turn into bigger projects.Maybe not today but in the future.Hope this helps.



__________________
Roofmaster417 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Replacing / Repairing T1-11 Siding... mikeamondo Roofing and Siding 10 11-05-2011 08:44 AM
aluminum (?) siding question! chaminade0408 Roofing and Siding 3 06-02-2010 03:43 PM
Replacing aluminum basement windows set in concrete cerebalp Windows and Doors 4 02-06-2010 10:00 AM
how to add railing to aluminum siding? crocket General Home Improvement Discussion 7 04-08-2009 06:19 PM
Replacing deck siding daleslad Roofing and Siding 19 06-15-2008 09:14 AM

Newest Threads

LATEST SPONSOR DEALS