DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > no lights




Reply
 
Thread Tools Search this Thread Display Modes
Old 12-24-2011, 07:08 PM  
EricC
Junior Member
registry_dropdown_24710_65472
 
Join Date: Nov 2011
Posts: 4
Default no lights

I used a device on the receptacle and it reads hot and ground reverse. What does that mean? Also lights don't work, reading 120v ground to hot and switch leg to ground, but lights are not able to go on. Help?


EricC is offline  
 
Reply With Quote
Old 12-26-2011, 03:40 PM  
nealtw
Contractor
registry_dropdown_20526_65544
 
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,171
Liked 1303 Times on 1146 Posts
Likes Given: 2201

Default

Is this the same problem or a new one?


nealtw is offline  
 
Reply With Quote
Old 12-26-2011, 09:08 PM  
JoeD
Contractor
registry_dropdown_728_65560
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 1,076
Liked 130 Times on 106 Posts
Likes Given: 4

Default

It means open neutral(white ) wire.
JoeD is offline  
 
Reply With Quote
Old 12-28-2011, 10:40 PM  
EricC
Junior Member
registry_dropdown_24710_65668
 
Join Date: Nov 2011
Posts: 4
Default

Its the same problem. Its my in laws house, I'm there usually once every two weeks. That's why I haven't fix the problem. But listen to this, the circuit breaker is a double pole single throw. So when both r on I get voltage on the circuit, and when I turn one off I still get voltage, when I turn the one that was off to on and the on to off I still get voltage, current. So when either one or both r on I get voltage. I get 120V and a reading of hot and ground reverse. I'm trying to explain as best as I can, sorry for the inconvenience.
EricC is offline  
 
Reply With Quote
Old 12-28-2011, 11:24 PM  
nealtw
Contractor
registry_dropdown_20526_65670
 
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,171
Liked 1303 Times on 1146 Posts
Likes Given: 2201

Default

If you remove the panel cover you will find that this is a three wire, black red and white. Power goes out on black and red and they both use the same white wire. I believe you still have a bad connection on the white. In the main box or the switch box or some other box in between. If not you have a damaged wire.
nealtw is offline  
 
Reply With Quote
Old 12-29-2011, 07:41 AM  
JoeD
Contractor
registry_dropdown_728_65672
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 1,076
Liked 130 Times on 106 Posts
Likes Given: 4

Default

I still say open neutral.
JoeD is offline  
 
Reply With Quote
Old 12-29-2011, 02:20 PM  
EricC
Junior Member
registry_dropdown_24710_65694
 
Join Date: Nov 2011
Posts: 4
Default

Ok guys thanks, I will let u know how it whent this weekend. I will be over there, thanks and have a happy new year.


EricC is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
lights out EricC Electrical and Wiring 3 11-24-2011 02:25 AM
flickering lights restez1963 Electrical and Wiring 14 07-10-2011 11:23 AM
Wiring Pot Lights McNab Electrical and Wiring 1 11-17-2008 04:34 PM
lights are pulsing young1inatruck Electrical and Wiring 1 10-24-2008 05:15 PM
No Lights Jed54 Electrical and Wiring 1 02-07-2008 10:06 PM

Newest Threads

LATEST SPONSOR DEALS