DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > Rough in?




Reply
 
Thread Tools Search this Thread Display Modes
Old 12-28-2011, 12:49 PM  
sdupp
Member
Join Date: Dec 2011
Location: Myrtle Beach, SC
Posts: 35
Liked 2 Times on 1 Posts
Likes Given: 3

Default Rough in?

When the builder built my house the back of the toilet was right up against the wall. They replaced the back of the toilet with a skinny one and that solved the problem. It appears the rough in was off, I measured and its 11”. Now I want to replace the old toilet with a chair height one. Should I buy a toilet for a ten inch rough in or is there a better way to solve my problem? Would this give me a little extra space on the back of toilet so it won’t touch the wall?


Thanks!!!


sdupp is offline  
 
Reply With Quote
Old 01-27-2013, 12:25 PM  
bean
Junior Member
Join Date: Jan 2013
Posts: 1
Default

I have a similar problem. The rough in distance is 8.5 to center line. Needed replacement. New 10 inch rough in Toto Drake does not appear to fit. What is my best option? 1. Move drain. 2. Offset adaptor. 3. 10 inch rough in that has some space at back in installation plan?. The Toto10 inch is too big. What other brand model would work?



Last edited by bean; 01-27-2013 at 12:54 PM.
bean is offline  
 
Reply With Quote
Old 01-27-2013, 12:38 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,349
Liked 148 Times on 126 Posts
Likes Given: 71

Default

A 10" rough in would be the best bet. Just my opinion.
kok328 is offline  
 
Reply With Quote
Old 01-27-2013, 10:37 PM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 14,255
Liked 1458 Times on 1286 Posts
Likes Given: 2515

Default

If you have a wood floor, moving the pipe may involve some extra framing from underneath. If you are against an outide wall with 2x6 studs or a non bairing wall you could cut back the studs 2" for and area to allow the tank to fit.
nealtw is online now  
 
Reply With Quote
Old 02-26-2013, 02:44 AM  
thomboz
Junior Member
Join Date: Feb 2013
Posts: 8
Default

This may sound crazy, but it could solve your situation. I just modified my toilet to mount the tank 6 feet high. It is just an experiment, but will allow me to put the toilet into a corner 45% from either wall. I did it with 60.00 worth of hardware store stuff and 1 1/2" ID clear tube. It makes more flush pressure and looks very 'funky'. And a side benefit is that I can see if the flapper valve is leaking because a trickle is running down the tube.
ThomBoz

Last edited by thomboz; 03-06-2013 at 02:03 PM. Reason: misprint
thomboz is offline  
 
Reply With Quote
Old 03-06-2013, 12:39 AM  
frankflynn
Junior Member
Join Date: Jul 2011
Location: Palo Alto, CA
Posts: 25
Liked 2 Times on 2 Posts
Likes Given: 1

Default

I once build out a wall 3" and put a nice shelf behind the toilet. Worked well and looked nice. Not sure it was that much less work than moving the drain.
frankflynn is offline  
 
Reply With Quote
Old 03-06-2013, 10:18 AM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 14,255
Liked 1458 Times on 1286 Posts
Likes Given: 2515

Default

thomboz: You can buy toilets that are made to fit in the corner.


nealtw is online now  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Toilet rough-in Nestor_Kelebay Plumbing Forum 11 08-20-2012 05:01 PM
Rough in? sdupp Plumbing Forum 5 01-01-2012 03:01 PM
Rough Pourch Finish mfank General Home Improvement Discussion 5 08-09-2008 10:10 PM
what is the rough in of a toilet? newuser General Home Improvement Discussion 1 05-12-2006 06:47 PM
3 piece rough-in v1rtu0s1ty Plumbing Forum 9 04-30-2006 10:08 AM

Newest Threads

LATEST SPONSOR DEALS