DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > Shower liner replacement




Reply
 
Thread Tools Search this Thread Display Modes
Old 03-14-2012, 06:41 PM  
mrbrown38
Junior Member
 
mrbrown38's Avatar
Join Date: Mar 2012
Posts: 3
Default Shower liner replacement

I'm sure it has a proper term, but I'm unsure of what it's called. There is a plastic/rubber piece that sits under the door of my shower door. It is hardened and looks like it's full of mold.

I was wondering what it's called and how I replacement?

Here is a picture of what it looks like:


I tried ripping out the current lining, but it looked like I was just ripping out the top portion.


mrbrown38 is offline  
 
Reply With Quote
Old 03-14-2012, 07:50 PM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,530
Liked 1354 Times on 1195 Posts
Likes Given: 2334

Default

Finding a replacement for an older door might be a trick but you may be able to find something that will work at places like this.

http://www.reflectwindow.com/catalog...r-Sweeps-Seals

Welcome to the site!


nealtw is online now  
 
Reply With Quote
Old 03-14-2012, 10:40 PM  
mrbrown38
Junior Member
 
mrbrown38's Avatar
Join Date: Mar 2012
Posts: 3
Default

Thank you very much. Shower Door Sweep, I'll remember that.

Any recommendations on removal? Do I have to take the frame apart somehow?
mrbrown38 is offline  
 
Reply With Quote
Old 03-14-2012, 11:33 PM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,530
Liked 1354 Times on 1195 Posts
Likes Given: 2334

Default

If you can find the right replacement, you might have to take it apart, but if all you can find is something to stick on top than I guess you could just cut it off flush.
nealtw is online now  
 
Reply With Quote
Old 04-05-2012, 08:27 AM  
mrbrown38
Junior Member
 
mrbrown38's Avatar
Join Date: Mar 2012
Posts: 3
Default

Back again =). So I think cutting it flesh might be the way to go. I can't figure out how to take the frame apart and feel like if I push any further I'll destroy the frame.

If I cut it off flesh, what are my options at that point?
mrbrown38 is offline  
 
Reply With Quote
Old 04-05-2012, 02:23 PM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,530
Liked 1354 Times on 1195 Posts
Likes Given: 2334

Default

You will have to find something simular that is a peel and stick. You may find it a hardware stores or glass shop.


nealtw is online now  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Price-pfister shower hot side two valve O-Ring replacement? bozodewd Plumbing Forum 4 06-14-2011 01:44 AM
Buy a New Tub or Acrylic Liner??? DeuceBaseman General Home Improvement Discussion 0 11-19-2009 09:16 AM
Fiberglass shower or tub liner vs. cultured marble custom? momtodem Plumbing Forum 3 09-11-2009 09:04 AM
Pond Liner jbfly03 Garden and Lawncare 5 08-17-2009 12:28 PM
Shower fixture replacement jlipman Plumbing Forum 2 11-11-2007 05:36 AM

Newest Threads

LATEST SPONSOR DEALS