DIY Home Improvement, Remodeling & Repair Forum > Appliances > Refrigerators > Whirlpool Icemaker won't cycle.




Reply
 
Thread Tools Search this Thread Display Modes
Old 05-27-2012, 04:15 PM  
wilbev
Junior Member
Join Date: May 2012
Posts: 2
Default Whirlpool Icemaker won't cycle.

I can't get my icemaker to cycle and drop the ice. This is about a 10 year old Whirlpool side-by-side refrigerator. I have replaced the ice maker with a brand new one and even added a new solenoid water value. I have tried the jumper to manually start the icemaker and it does eventually drop the ice, however it does seem to struggle on it. Could this mean the Electronic control board is bad? The bottom of the ice maker tray is cold.

The refrigerator is about 10 years old and it's model is: ED2GTQXKQOO


wilbev is offline  
 
Reply With Quote
Old 05-27-2012, 07:35 PM  
jeff1
Contractor
 
jeff1's Avatar
Join Date: Mar 2006
Posts: 466
Liked 34 Times on 28 Posts
Likes Given: 1

Default

Hi,

Quote:
I have replaced the ice maker with a brand new one and even added a new solenoid water value.
To correct this problem?

Quote:
I have tried the jumper to manually start the icemaker and it does eventually drop the ice, however it does seem to struggle on it.
The icemaker didn't start up right away when you bypassed the thermostat to cycle the icemaker on?

Quote:
Could this mean the Electronic control board is bad?
What electronic control?...yours doesn't appear to have one.

Has the freezer temp been checked? Needs to get below 15F before the icemaker will run.

Quote:
The bottom of the ice maker tray is cold
Should be until the icemaker cycles, then warms up to help drop out the cubes.

jeff.


__________________
Appliance Repair Aid
http://www.applianceaid.com/
jeff1 is offline  
 
Reply With Quote
Old 05-28-2012, 11:08 AM  
wilbev
Junior Member
Join Date: May 2012
Posts: 2
Default

Quote:
To correct this problem?
Yes, to correct the problem.


Quote:
The icemaker didn't start up right away when you bypassed the thermostat to cycle the icemaker on?
It definitely starts right away but I said it struggles a little bit trying to break up the ice, however the last time I manually cycled it, it didn't seem to struggle, just dropped the ice within a minute or 2.

Quote:
What electronic control?...yours doesn't appear to have one.
Yes, I realize that now that I don't have a electronic control.
Quote:
Has the freezer temp been checked? Needs to get below 15F before the icemaker will run.
After manually cycling the ice gets made in less than 2 hours, so I don't think this is the problem. It does seem to warm up when I manually cycle it.
HTML Code:
Should be until the icemaker cycles, then warms up to help drop out the cubes.
Yes, it does seem to warm up when I manually cycle it. Maybe it's just a bad ice maker I got? Not sure what else it could be. Power is needed to the ice maker to even manually cycle it, correct?
wilbev is offline  
 
Reply With Quote
Old 05-29-2012, 07:00 AM  
jeff1
Contractor
 
jeff1's Avatar
Join Date: Mar 2006
Posts: 466
Liked 34 Times on 28 Posts
Likes Given: 1

Default

Quote:
Yes, it does seem to warm up when I manually cycle it. Maybe it's just a bad ice maker I got?
If the new one is struggling to go, yes that would be a very good possibility.

Quote:
Power is needed to the ice maker to even manually cycle it, correct?
Yes.


Replacement 8 cube icemaker kit, Manufacturer Number 4317943

jeff.
__________________
Appliance Repair Aid
http://www.applianceaid.com/
jeff1 is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
GE Dryer (model DBXR463ED2WW) does not cycle to lower temp Back40 General Appliance Discussion 3 11-22-2011 07:04 AM
Icemaker won't dispense ice, ran a small test already amodoko Refrigerators 2 08-10-2010 11:18 PM
refig icemaker heat coil problem seismo1951 General Appliance Discussion 7 01-25-2009 09:14 PM
kenmore icemaker speed needs adjusting rpmooney Introductions 1 07-20-2006 11:45 AM
Washer wont go into spin cycle.... cease General Appliance Discussion 1 04-07-2006 09:24 PM

Newest Threads

LATEST SPONSOR DEALS