DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > Screw holes in used metal galvanized roofing

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 06-26-2012, 03:26 PM  
Join Date: Apr 2011
Location: lakewood, wa
Posts: 51
Likes Given: 6

Default Screw holes in used metal galvanized roofing

We are building storage shed.

A friend is giving away used galvanized roofing.

It has screw holes on every 12 inches or less...

can we reuse these roofing?

if yes How can we patch these holes?

Also can we put these 2.3" x 12' galvanized roofing panels directly on rafters?

Last edited by vikasintl; 06-26-2012 at 03:30 PM.
vikasintl is offline  
Reply With Quote
Old 06-26-2012, 04:41 PM  
Contractor retired
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 23,709
Liked 3052 Times on 2671 Posts
Likes Given: 5041


You strap across the rafters with 2x4s to suport the roofing. If you strap it 12" on center you might be able to use the old holes.

nealtw is online now  
Reply With Quote
Old 06-26-2012, 07:01 PM  
Senior Member
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,735
Liked 245 Times on 207 Posts
Likes Given: 116


You could use a dab of Alumaseal on the holes but, you would have to maintenance them every 5yrs. or so.
kok328 is offline  
Reply With Quote
Old 09-20-2012, 01:08 PM  
slownsteady's Avatar
Join Date: Jun 2009
Location: Newton, NJ
Posts: 6,455
Liked 1160 Times on 962 Posts
Likes Given: 1905


If the value of the shed's contents is important - is worth more than the roofing panels, then you should not fool around with a potentially leaky roof.
slownsteady is online now  
Reply With Quote
Old 09-20-2012, 02:45 PM  
Join Date: Jan 2010
Location: , Western Hemisphere, N of the equator
Posts: 2,471
Liked 176 Times on 162 Posts
Likes Given: 108


Pop rivets with rubber washers then metal washers on the underside. Then it's your labor at whatever rate you charge
vs. the value of punctured sheets
vs. the cost of new sheets.

Last edited by Wuzzat?; 09-20-2012 at 02:49 PM.
Wuzzat? is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Stretched screw holes in aluminum patio frame Dennisrl Decks & Patios 12 02-20-2017 11:08 AM
hopefully I didn't screw up in repainting a corrugated metal roof MelonieNY Painting Forum 0 10-16-2010 09:28 AM
Metal Roofing ??s overdriv Roofing and Siding 1 06-17-2009 05:55 AM
Metal Roofing PoolShark Garage & Workshop Forum 2 08-15-2008 01:16 PM

Newest Threads