Plumbing electric water heater attachment
I purchased an eco-18 water heater and 2 webbs isolator exp valves
. Really slick compact setup, unfort when I received the valves and went to install them, due to the way the handle turns I can't use these with this electric water heater directly. I went online and found 3/4" MIP to FIP cables unfortunately I need about a 6" cable at max because as soon as it would come out of the valve from that I need to right angle it into the wall to avoid the washer plumbing... Any suggestions? Best I can find is a 12 " connector @ amazon listing
. Any thoughts or suggestions? I considered just cutting a slit in the wall where the valve handle would rotate but that didn't seem like a good idea from a wife standpoint
10/11: Bought the perfect house, 11/12: 10k & 200 hours,08/13: 30k & 400 hours into the perfect house, 12/13: 35k & 500 hours,02/14: 37k & 550 hours, 08/14: 38k & 650 hours
05/15: 40k & 700 hours and I think it's done, Home appraised +40k!!! 1 to 1 ratio achieved!
03/16: Filed small claims court on contractor for siding + all of previous