DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > Ridge vent and soffit vents are all thats required?




Reply
 
Thread Tools Search this Thread Display Modes
Old 07-25-2013, 02:12 PM  
drewdin
Junior Member
Join Date: Aug 2012
Posts: 420
Liked 33 Times on 29 Posts
Likes Given: 99

Default Ridge vent and soffit vents are all thats required?

I tend to overkill things, it makes me feel better. So i had an inspector over and he told me that my attic, which I had a ridge vent and soffit vents installed was the minimum required.

When i asked him what else I could do he said ti was fine, it was about 90 up there on a 97 day but if I can make it better why not.

My question is that if a ridge and soffit is the most basic thing i can do, what would medium and max?

I know I can run into venting issues if its not done right, so what would be some steps to go past the minimum? Thanks


drewdin is offline  
 
Reply With Quote
Old 07-25-2013, 02:23 PM  
oldognewtrick
Moderator
HRT_ADMIN.png
 
oldognewtrick's Avatar
Join Date: Jul 2009
Location: Nashville, TN
Posts: 7,078
Liked 695 Times on 568 Posts
Likes Given: 220

Default

Drew, if it was 90 on a 97' day, leave well enough alone. Most attics I get in in a 97' day will hit 120 plus. What ever you do, DO NOT mix exhaust types of ventilation.


oldognewtrick is online now  
kok328 Likes This 
Reply With Quote
Old 07-25-2013, 03:09 PM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,512
Liked 1350 Times on 1191 Posts
Likes Given: 2325

Default

Your not likely ever going to make it better than it is.
nealtw is offline  
kok328 Likes This 
Reply With Quote
Old 07-25-2013, 03:55 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,337
Liked 148 Times on 126 Posts
Likes Given: 71

Default

Some things you just can't over kill, it is either right or wrong. To attempt more than what you have may actually make it worse and waste money.
kok328 is offline  
 
Reply With Quote
Old 07-25-2013, 08:45 PM  
drewdin
Junior Member
Join Date: Aug 2012
Posts: 420
Liked 33 Times on 29 Posts
Likes Given: 99

Default

Thanks guys, when he said minimum it made me want to make it better. I would rather leave it than ruin it
drewdin is offline  
nealtw Likes This 
Reply With Quote
Old 09-16-2013, 03:15 PM  
jdoorn
Junior Member
Join Date: Jul 2012
Posts: 1
Liked 2 Times on 1 Posts

Default

Agreed with the others. It all comes down to a calculation of what's called "net free area", or your ratio of intake (soffit) vs outtake (ridge vent). If you've created a balanced system, which it sounds like you have, there's nothing better you can do. Here's an article about how to create your balanced system: http://www.quarrix.com/help-support/...lanced-system/
jdoorn is offline  
2
People Like This 
Reply With Quote
Old 09-16-2013, 04:08 PM  
drewdin
Junior Member
Join Date: Aug 2012
Posts: 420
Liked 33 Times on 29 Posts
Likes Given: 99

Default

I didn't calculate anything, i left it up to the roofers. Based on the job they did, im going to measure and calculate now! Thanks
drewdin is offline  
 
Reply With Quote
Old 09-17-2013, 05:07 AM  
bud16415
Fixer Upper
 
bud16415's Avatar
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 1,924
Liked 605 Times on 464 Posts
Likes Given: 225

Default

If its cooler in the attic than it is outside where is the cooling coming from?
bud16415 is offline  
 
Reply With Quote
Old 09-17-2013, 11:37 AM  
drewdin
Junior Member
Join Date: Aug 2012
Posts: 420
Liked 33 Times on 29 Posts
Likes Given: 99

Default

@bud16415, not sure. maybe it was the same as outside temp but it didn't seem as hot. previously without the vents, it would be 10-15 degrees hotter at least.
drewdin is offline  
 
Reply With Quote
Old 09-17-2013, 12:37 PM  
bud16415
Fixer Upper
 
bud16415's Avatar
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 1,924
Liked 605 Times on 464 Posts
Likes Given: 225

Default

That seems better. The best you could do with perfect ventilation I would think is maintain the inside the same as outside. That is unless you are pouring the coal to the AC and have poor insulation and partly cooling the attic.

I was assuming you had measured the temp at both locations. Temperature is a lot like light levels our bodies are not very good at measuring ether.


bud16415 is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Bathroom exhaust fan. Is it ok to vent it through attic & up to ridge vent? lola123go General Home Improvement Discussion 15 05-20-2015 11:31 PM
Is my ridge vent actually venting? kjjb0204 Roofing and Siding 12 12-14-2011 11:39 AM
test for ventilation or new soffit vents? bill's quest Roofing and Siding 5 07-30-2009 11:39 PM
Ridge Vent? Scorask Roofing and Siding 5 09-04-2008 08:50 PM
Ridge vent Bridgewater Roofing and Siding 7 08-20-2006 12:26 PM

Newest Threads

LATEST SPONSOR DEALS