DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Bricks, Masonry and Concrete > Power Tool To Remove Caulk From Brick




Reply
 
Thread Tools Search this Thread Display Modes
Old 09-13-2013, 04:02 PM  
TxHomeowner
Junior Member
Join Date: Jun 2013
Posts: 15
Liked 1 Times on 1 Posts
Likes Given: 13

Default Power Tool To Remove Caulk From Brick

Two layers of silicone caulk seals the garage frame sides to the house brick. I used 3M Caulk Remover but left it on too long so the hot sun baked it dry. Working in 100 degree temps so something other than a hand scraper is perferred.

Would a wire brush wheel powered by my drill help me quickly take the caulk off the brick?

Other suggestions please. Thanks!


TxHomeowner is offline  
 
Reply With Quote
Old 09-14-2013, 10:47 AM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,843
Liked 1400 Times on 1234 Posts
Likes Given: 2420

Default

I would be concerned about damage to the brick.


nealtw is offline  
 
Reply With Quote
Old 09-14-2013, 01:27 PM  
elbo
Join Date: Nov 2011
Location: , florida
Posts: 101
Liked 35 Times on 32 Posts
Likes Given: 24

Default

when the weather gets cooler, try paint stripper. If you can get some "Turco" that would be best
elbo is offline  
 
Reply With Quote
Old 09-18-2013, 10:14 PM  
TxHomeowner
Junior Member
Join Date: Jun 2013
Posts: 15
Liked 1 Times on 1 Posts
Likes Given: 13

Default

That has been the case in the past. Seems our home builder used caulk to hide cheap lumber plus the caulk almost welded itself to the smooth faced brick. The multi function tool using a flat blade was recommend to me by a pro but was too expensive and would probably never be used again. Tried the most powerful paint stripper I have ever found. It did nothing. I used Liftoff brand caulk and foam softer, a painters tool, wire brush and very, very narrow and intense spray sream of water. Got most all off. I'm hopping the building contractor will do me a solid and remove te small amount left. Oh, I worked at first light for about 1 hour for four days.
TxHomeowner is offline  
 
Reply With Quote
Old 09-19-2013, 12:25 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
Join Date: Feb 2010
Location: San Diego
Posts: 1,506
Liked 513 Times on 392 Posts
Likes Given: 209

Default

I think you needed to try an oscillating multi-tool. You can rent the sucker to do your job in less than a day! Sounds like you took the long road instead.

Christmas is coming ... Look at these toys:

http://www.popularmechanics.com/home...e-test#slide-1


CallMeVilla is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Copper Sillcock Broke off inside Brick Wall- How to remove? amodoko Plumbing Forum 11 12-02-2012 09:51 PM
Caulk removal? Rodney R General Home Improvement Discussion 4 06-24-2012 09:21 AM
Fein MultiMaster 7-in-1 Power Tool SPISurfer Tools 15 04-08-2012 11:48 PM
bathtub caulk Christian Plumbing Forum 18 04-16-2011 01:17 PM
How to remove paint from brick beezee3 Bricks, Masonry and Concrete 5 10-01-2006 07:07 AM

Newest Threads

LATEST SPONSOR DEALS