DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Decks & Patios > deck drainage/soil




Reply
 
Thread Tools Search this Thread Display Modes
Old 08-24-2014, 01:23 PM  
floatr
Member
 
Join Date: Aug 2013
Posts: 32
Liked 1 Times on 1 Posts

Default deck drainage/soil

I am replacing a old deck and have had issues with the water not draining out from under it well after a rain Its clay type soil..It is 15 inches above ground and facing a direction where the corner is that gets NO sunlight ever ,so that complicates the dry out much after a rain.It is in the southeast where its humid already so that only adds to the issue.
What are the best methods to use to prevent the high moisture or at least improve soil/drainage ?
I thought maybe slope it with a french drain at end but not sure about the water that goes into clay below deck.
Any other info is appreciated



__________________
floatr is offline  
 
Reply With Quote Quick reply to this message
Old 08-24-2014, 01:39 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,996
Liked 967 Times on 860 Posts
Likes Given: 1653

Default

It is always importand that the landscape slopes away from the house. I would reshape that and cover it with sheep poly and a couple inches of graver so water would just run out. Then if you still have a problem after the deck is built you can just do your drain around the perimeter.



__________________
nealtw is online now  
Wuzzat? Likes This 
Reply With Quote Quick reply to this message
Old 08-26-2014, 01:48 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Yes, make the soil even less porous and transfer the problem to someplace else that can handle it. A sump pump sort of does the same thing.

French drains have never worked for me but I've never done the calculations ahead of time. Lindeburg's books on taking the PE exam for civil engineering may help with this. My local library had a few of these books.

__________________

Last edited by Wuzzat?; 08-26-2014 at 01:53 PM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 08-26-2014, 05:33 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,996
Liked 967 Times on 860 Posts
Likes Given: 1653

Default

Quote:
Originally Posted by Wuzzat? View Post
Yes, make the soil even less porous and transfer the problem to someplace else that can handle it. A sump pump sort of does the same thing.

French drains have never worked for me but I've never done the calculations ahead of time. Lindeburg's books on taking the PE exam for civil engineering may help with this. My local library had a few of these books.
Do a simple perk test before attempting a french drain.
__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 08-26-2014, 05:52 PM  
slownsteady
Supporting Member
HRT_SUPPORTER.png
 
slownsteady's Avatar
 
Join Date: Jun 2009
Location: Newton, NJ
Posts: 1,430
Liked 226 Times on 189 Posts
Likes Given: 279

Default

Quote:
I would reshape that and cover it with sheep poly and a couple inches of graver so water would just run out
if you can't find sheep poly, just use plastic

Otherwise neal is right on about this.
__________________
slownsteady is offline  
nealtw Likes This 
Reply With Quote Quick reply to this message
Old 08-26-2014, 09:43 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

I should try this myself
http://www.ianrpubs.unl.edu/live/g1472/build/g1472.pdf
or
http://www.todayshomeowner.com/diy-s...for-your-yard/

__________________

Last edited by Wuzzat?; 08-26-2014 at 09:46 PM.
Wuzzat? is offline  
slownsteady Likes This 
Reply With Quote Quick reply to this message
Old 08-26-2014, 10:00 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,996
Liked 967 Times on 860 Posts
Likes Given: 1653

Default

Sometime raising the level of a down hill slope with better soil is all it takes.

__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 08-26-2014, 10:30 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

It's late so this may not be right -

A 12" dia hole, 12" deep has a dirt surface area of 452 + 113 = 565 sq. in. and can handle 2" of rain per hour. The hole is 113 sq. in. in area.

A 10' x 12' deck has a surface area of 17,280 sq. in. and so at this same rainfall rate would need a French Drain with a drain dirt surface area of 565x17280/113= 86400 sq. in.. For a cube shaped hole this is 44" on a side, roughly.

__________________
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 08-26-2014, 10:37 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,996
Liked 967 Times on 860 Posts
Likes Given: 1653

Default

Quote:
Originally Posted by Wuzzat? View Post
It's late so this may not be right -

A 12" dia hole, 12" deep has a dirt surface area of 452 + 113 = 565 sq. in. and can handle 2" of rain per hour. The hole is 113 sq. in. in area.

A 10' x 12' deck has a surface area of 17,280 sq. in. and so at this same rainfall rate would need a French Drain with a drain dirt surface area of 565x17280/113= 86400 sq. in.. For a cube shaped hole this is 44" on a side, roughly.
Convert that to to a ditch with perf pipe and gravel, more like a feild for a septic field.
__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 08-26-2014, 10:42 PM  
slownsteady
Supporting Member
HRT_SUPPORTER.png
 
slownsteady's Avatar
 
Join Date: Jun 2009
Location: Newton, NJ
Posts: 1,430
Liked 226 Times on 189 Posts
Likes Given: 279

Default

Quote:
Originally Posted by Wuzzat? View Post
It's late so this may not be right -

A 12" dia hole, 12" deep has a dirt surface area of 452 + 113 = 565 sq. in. and can handle 2" of rain per hour. The hole is 113 sq. in. in area.

A 10' x 12' deck has a surface area of 17,280 sq. in. and so at this same rainfall rate would need a French Drain with a drain dirt surface area of 565x17280/113= 86400 sq. in.. For a cube shaped hole this is 44" on a side, roughly.
I'm not disputing the math here (not qualified) but add this variable: the deck diverts some water and the ground underneath collects the rest.


__________________
slownsteady is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Tearing up ground level deck to deal with drainage issues at rear of house swindmill Framing and Foundation 21 06-27-2013 02:58 PM
Deck heaving due to ground water or unstable soil DECK DOWNER Decks & Patios 1 01-09-2010 06:56 PM
Deck Drainage Systems admin_old Decks & Patios 3 09-05-2007 02:08 AM
deck drainage problem darsunt General Home Improvement Discussion 0 12-28-2006 09:01 PM
looking for deck drainage solutions.... kusa24 General Home Improvement Discussion 5 11-20-2006 03:33 PM

Newest Threads

LATEST SPONSOR DEALS