DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Bricks, Masonry and Concrete > Install siding on cinder block




Reply
 
Thread Tools Search this Thread Display Modes
Old 01-28-2008, 03:08 PM  
OLDummy
Junior Member
registry_dropdown_4538_15175
 
Join Date: Oct 2007
Posts: 7
Default

Quote:
Originally Posted by WICinderella View Post
i am getting siding put on my 55 year old cinder block house and will either get board foam insulation between 2 x 4s or blown on foam between 2 x 4s. If I get board siding especially I wonder if I should have a moisture barrier like 6 mil polyurethane put under the foam boards or even under the blown on foam. One of the reasons I want the insulation under siding is to keep my house less moist on the inside.
How do you intend to secure the 2x4's - that is my main concern!

Terry


OLDummy is offline  
 
Reply With Quote
Old 01-28-2008, 04:26 PM  
glennjanie
Senior Member
registry_dropdown_630_15183
 
Join Date: Mar 2006
Posts: 2,990
Liked 3 Times on 3 Posts

Send a message via AIM to glennjanie
Default

There is another option for insulation in your block house. If you can get to the top of the blocks (even in the attic) you can pour vermiculite insulation in them. It does a wonderful job and the only drawback is, if you make a hole in the blocks or there is already a hole (like around a receptacle) the vermiculite will continue to pour out the hole until it empties that core and maybe a couple more. It doesn't change anything inside.
Do you have the walls covered on the inside? They could be plastered directly or have drywall glued on them (among other things).
Glenn


glennjanie is offline  
 
Reply With Quote
Old 01-29-2008, 10:28 AM  
WICinderella
Junior Member
registry_dropdown_5479_15215
 
Join Date: Jan 2008
Posts: 6
Default

I have already had foam blown into the centers of the cinder blocks, which were hollow. This gave me an R-5. The contractor is talking about attaching the 2 x 4s with tap-con screws. There will be 2 x 6s at the corners of the house, to anchor the vinyl siding. I am getting 1 1/2 inches of foam board glued to the cinder block and then also furring strips which are 2 x 4s with screws. Then 1/2 inch of foam board over the 2 x 4s, for about R-11 for all the boards. Then R-4 insulated vinyl siding over that. The contractor said this will be R-15 total added.
WICinderella is offline  
 
Reply With Quote
Old 01-29-2008, 01:11 PM  
glennjanie
Senior Member
registry_dropdown_630_15220
 
Join Date: Mar 2006
Posts: 2,990
Liked 3 Times on 3 Posts

Send a message via AIM to glennjanie
Default

That sounds like a plan to me, WICinderella.
Glenn
glennjanie is offline  
 
Reply With Quote
Old 01-30-2008, 09:15 PM  
Daryl in Nanoose
Senior Member
 
Daryl in Nanoose's Avatar
registry_dropdown_546_15276
 
Join Date: Feb 2006
Location: Nanoose Bay, BC
Posts: 764
Liked 4 Times on 4 Posts
Likes Given: 5

Default

Well you should notice a big difference, sounds good to me to.
__________________
[url]http://edhome.shawwebspace.ca/[/url]
Daryl in Nanoose is offline  
 
Reply With Quote
Old 01-31-2008, 10:03 AM  
WICinderella
Junior Member
registry_dropdown_5479_15310
 
Join Date: Jan 2008
Posts: 6
Default

I am thinking of going with another contractor because they don't use 2 x 4s. They use 1 x 3 furring and no screws. They use 2 inch of foam board and also the insulated vinyl siding. I don't really understand how it can adhere strongly enough without screws, but he said they use marine adhesive. Do you think this will hold up as strongly as 2 x 4s and screws? The corners will be fully insulated, unlike with using the 2 x 6s at the corners.
WICinderella is offline  
 
Reply With Quote
Old 01-31-2008, 10:28 AM  
guyod
Senior Member
registry_dropdown_5296_15317
 
Join Date: Jan 2008
Location: Wind Gap, PA
Posts: 423
Liked 21 Times on 20 Posts
Likes Given: 8

Default

How do they plan on using 2" foam with 3/4 strips? are they planning on floating the siding 1 1/4 inches?

Im in the middle of siding a cinder block house. I went with a 5/4 by 3 board and attached it with glue and concrete nails. they are holding very strong im only using 4'x50' 3/8" insulation over top.(what the customer wanted) Im having some splitting issues when nailing im sure it would be alot worse if using a 1x3..

you are probably looking at an extra $1000 to use 2x4's..

Im assuming your contractor is an professional and does this for a living im probably is no place to second guess him.. but at the least i would make sure he did other houses like this and check them out..
guyod is offline  
 
Reply With Quote
Old 01-31-2008, 10:46 AM  
WICinderella
Junior Member
registry_dropdown_5479_15322
 
Join Date: Jan 2008
Posts: 6
Default

The contractor #1 using 2 x 4s and screws is asking less than the contractor #2 using 1 x3 furring strips and no screws. What I want is not for the screws to come loose on the 2 x 4s. How are 1 x 3 furring strips attached, always with nails, or sometimes with screws? The only way I can see a 1 x3 furring strip working is if the 1" is against the wall so the strip extends out 3".
WICinderella is offline  
 
Reply With Quote
Old 01-31-2008, 11:18 AM  
guyod
Senior Member
registry_dropdown_5296_15326
 
Join Date: Jan 2008
Location: Wind Gap, PA
Posts: 423
Liked 21 Times on 20 Posts
Likes Given: 8

Default

Contractor #1 is giving you the better deal then.. screws are better but are more money and take longer so a contractor wanting to use nails is going to want more $$ to use screws.. you can't attach 1x3's on there ends. . there would wouldnt be enough surface area ..would you rather use furring strips because you dont like the idea of using 2x6's on the corners?

the 2X6 will make for alot stronger corners. the installer needs a nailing surface to attach the corner posts too then a surface to attach the start of the siding. 3" makes it a little tight and if he runs out of nailing surface it will just not get nailed.
guyod is offline  
 
Reply With Quote
Old 01-31-2008, 12:27 PM  
WICinderella
Junior Member
registry_dropdown_5479_15339
 
Join Date: Jan 2008
Posts: 6
Default

My questions are: is the brittleness of cinder block going to causes screws to eventually detach, or is the glue alone weak enough to eventually detach? If screws coming out cause the block to fragment, it that repairable? How much weight can a furring strip hold? Is a 2 x 4 better for holding the 2" foamboard and vinyl siding in place? What kind of foam board, and what kind of foam-backed vinyl siding has the highest R value?


WICinderella is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Exterior spalling on cinder block foundation wall pkendron Bricks, Masonry and Concrete 6 02-25-2015 09:01 PM
Is there a mold issue when siding a block house nowonmai Roofing and Siding 0 05-11-2008 06:57 PM
Need options for foundation wall without cinder block... kusa24 Framing and Foundation 4 11-07-2006 02:50 PM
Siding Cement Block newrenovator Roofing and Siding 9 07-28-2006 03:31 AM
Cinder block wall options J Hawkes Framing and Foundation 5 12-18-2005 09:46 PM

Newest Threads

LATEST SPONSOR DEALS