DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Framing and Foundation > Installing entry door to garage




Reply
 
Thread Tools Search this Thread Display Modes
Old 03-29-2006, 07:20 PM  
Mikester
Junior Member
 
Join Date: Mar 2006
Posts: 1
Default Installing entry door to garage

Hello everyone, I'm new to this forum and looking for advice. I'd like to install a door between my laundry room and garage. This means cutting an opening in the concrete block at the back of the garage, and through the framing in the laundry room. I'm thinking of renting a gasoline powered masonry saw for cutting out the blocks, and installing a steel lintel in the block, and a header in the framing. Right now I'm not sure which one is carying the load to the 2nd floor. Once I cut out the blocks, can I simply frame it with 2x6 or 2x8's or do I need to do anything special like adding concrete to the blocks that are cut halfway? Also, I thought I'd make the top horizontal cut first, install the steel lintel, then make the rest of the cuts. Thanks for your help.



__________________
Mikester is offline  
 
Reply With Quote Quick reply to this message
Old 03-29-2006, 07:54 PM  
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Posts: 1,273
Liked 4 Times on 4 Posts

Default

It sounds to me like you've thought this through pretty well already. Filling the blocks around the opening with concrete would be good, would be better with re-bar. That would also be a good time to put some anchors in the blocks to fasten the frame to. The frame will spread the impact load of the door closing and wind hitting it when the Garage door is opened. You could cut the block all of the way to the ceiling and put a header in. I don't know what your situation is though. By all means do as you said and get the supporting members in first. Start at the top and get the lintel in as soon as you get saw cuts down the sides just low enough for the saw get a good cut when you go back to cut the sides the rest of the way down.

Tom in KY, not a fun job, wear a mask that covers all you can cover. Your safety glasses will be dusted over for most of the cuts. KEEP them on anyway.

__________________

[URL="http://www.houserepairtalk.com/announcement.php?f=39&a=6"][size=3]The Ten Commandments of House Repair Talk[/size][/URL]



[URL="http://home.bellsouth.net/p/s/community.dll?ep=16&groupid=289528&ck="]Square Eye's home page[/URL]

Square Eye is offline  
 
Reply With Quote Quick reply to this message
Old 04-07-2006, 08:49 AM  
Ducttapeman
Junior Member
 
Join Date: Mar 2006
Posts: 9
Default

Not sure about the block cutting, as that construction is something I have not had the pleasure to work on.
One thing I would like to mention is that a fire rated door is required for that application.
Or, at least it is in our area.
Have to contact building department.
You may already have considered it, but just wanted to mention it.

__________________
Ducttapeman is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Tilson Home's cracked concrete garage stoker Bricks, Masonry and Concrete 16 07-25-2013 04:59 PM
good wiring reference? garage and loft. Philphine Electrical and Wiring 2 01-08-2009 07:55 PM
Installing vinyl siding to an unlevel garage pbrow1 Roofing and Siding 3 06-09-2008 02:02 PM
Overheating Garage wheelman General Home Improvement Discussion 14 12-20-2006 12:29 PM
Firewall questions on garage frank754 General Home Improvement Discussion 5 07-31-2006 08:22 PM

Newest Threads

LATEST SPONSOR DEALS