The 1x2 that's running across the top back side is the board that's pulled off. Is there a way to reattach it to the cabinet? We could screw in from the side easily, but it's showing. The cabinet on the other side has this terrible old hood installed in it, which we would remove except it's holding everything up right now.
There is a screw going through the flimsy back and the 1x2. The 1x2 (and back) are attached to the wall, but the 1x2 has come off the cabinet. So the cabinet is leaning forward, and then pulling on the backing.
There's not much weight in it; a bag of lentils, a bag of rice, and various oils and vinegars. We're fairly certain it's been like this since we purchased the house; we only really investigated it now because we want to replace the hood.