DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC > oil Burner pump




Reply
 
Thread Tools Search this Thread Display Modes
Old 01-27-2009, 06:00 PM  
saselker
Junior Member
 
Join Date: Apr 2008
Posts: 2
Default oil Burner pump

I have an old GM Delco Heat furnace and burner. Recently I have had an episode or two where I needed to reset the unit to get it to run(Old style Honeywell control). I cleand the burner/changed the nozzle etc. and the unit is running very well. However the pump is cracked and leaking around a pipe plug(appears to be an alternate fuel inlet). My question is whether or not I'll be able to get a replacement pump for a burner this old, and if so where(in general) to get one. The pump has two lower case "h"s with a diamond between them if thats any help. I always thought the pumps were pretty standard but I'm really not sure. I know I should really consider replacing the whole furnace/burner due to its age and lack of effeciency, but as always cost is a concern. Not to mention it very seldom runs due to me heating primarily with wood.



__________________
saselker is offline  
 
Reply With Quote Quick reply to this message
Old 02-06-2009, 09:52 PM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Welcome Saselker:
Yes, new oil pumps are available for most units.
You might try Grainger, Johnstone, United Refrigeration or a local oil heater repair specialist.
Glenn

__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Basement water leak due to a submersible sump pump failing in a water well stanigator Plumbing Forum 1 05-18-2009 06:27 PM
Electric Heat Pump & Programmable Thermostat John Greeb HVAC 2 01-09-2009 10:01 PM
Heat pump not hitting target temp pens66 HVAC 5 07-17-2008 12:29 PM
Sump Pump Question cibula11 Plumbing Forum 3 04-27-2007 06:41 AM
york split system heat pump brian HVAC 1 08-01-2006 12:48 AM

Newest Threads

LATEST SPONSOR DEALS