DIY Home Improvement, Remodeling & Repair Forum > Appliances > General Appliance Discussion > Electric flat top stoves




Reply
 
Thread Tools Search this Thread Display Modes
Old 04-03-2006, 07:15 PM  
birken
Junior Member
Join Date: Feb 2006
Posts: 17
Default Electric flat top stoves

Any negative points to the electric stoves with flat surfaces, no visable coils?


birken is offline  
 
Reply With Quote
Old 04-04-2006, 06:02 AM  
jeff1
Contractor
 
jeff1's Avatar
Join Date: Mar 2006
Posts: 465
Liked 34 Times on 28 Posts
Likes Given: 1

Default

Hi,

Quote:
Any negative points to the electric stoves with flat surfaces
Yup.
Need to be be conscious of the cleaning between cooking times. More difficult to repair the surface elements. Possible brakage. Pots and pans must have flat bottoms!



So far 3 teens in our house have not broken ours!

Advantages, no rings or pans to clean or worry about. Can get a lot of variations of element sizes for cooking with different size pots. Spills are contained on top of the range and do not run down inside. Cooktop around the element does not get hot like coils element tops do.

http://www.applianceaid.com/cerantop.html

jeff.


__________________
Appliance Repair Aid
http://www.applianceaid.com/
jeff1 is offline  
 
Reply With Quote
Old 04-04-2006, 06:22 AM  
CraigFL
Senior Member
Join Date: Mar 2006
Posts: 409
Default

I have one and agree with Jeff. A couple of other things...
1. Fancy white jagged outlines showing burner location are blackened/burnt in places.
2. Heat output is lower than open style burners. If you need lots of heat for a Wok or frying, it works but not very well.

Craig
CraigFL is offline  
 
Reply With Quote
Old 04-04-2006, 01:02 PM  
birken
Junior Member
Join Date: Feb 2006
Posts: 17
Default

What do you use to clean them?
birken is offline  
 
Reply With Quote
Old 04-04-2006, 01:17 PM  
CraigFL
Senior Member
Join Date: Mar 2006
Posts: 409
Default

You can buy the special cleaner or use soft scrub and a single edge razor blade.
CraigFL is offline  
 
Reply With Quote
Old 04-04-2006, 05:58 PM  
jeff1
Contractor
 
jeff1's Avatar
Join Date: Mar 2006
Posts: 465
Liked 34 Times on 28 Posts
Likes Given: 1

Default

Quote:
Originally Posted by birken
What do you use to clean them?
Some helps....
http://www.applianceaid.com/cerantop.html

jeff.
__________________
Appliance Repair Aid
http://www.applianceaid.com/
jeff1 is offline  
 
Reply With Quote
Old 04-23-2006, 09:31 PM  
TxBuilder
HRT_LIFETIMESUPPORTER.png
 
TxBuilder's Avatar
Join Date: Feb 2005
Posts: 1,677
Liked 5 Times on 5 Posts
Likes Given: 4

Default

I have one that is scratched really bad on the burners. Any way to repair those scratches?
TxBuilder is offline  
 
Reply With Quote
Old 04-23-2006, 09:33 PM  
jeff1
Contractor
 
jeff1's Avatar
Join Date: Mar 2006
Posts: 465
Liked 34 Times on 28 Posts
Likes Given: 1

Default

Quote:
Originally Posted by TxBuilder
Any way to repair those scratches?
The ceran glass top style?....if yes....Nope

jeff.
__________________
Appliance Repair Aid
http://www.applianceaid.com/
jeff1 is offline  
 
Reply With Quote
Old 04-23-2006, 10:05 PM  
TxBuilder
HRT_LIFETIMESUPPORTER.png
 
TxBuilder's Avatar
Join Date: Feb 2005
Posts: 1,677
Liked 5 Times on 5 Posts
Likes Given: 4

Default

Ceramic glass cooktop.

Last edited by TxBuilder; 04-23-2006 at 11:51 PM.
TxBuilder is offline  
 
Reply With Quote
Old 04-24-2006, 10:23 PM  
Outbacker
Member
Join Date: Feb 2006
Posts: 62
Default

We have one and quite enjoy it. My only concern with them when we were shopping for one was spill overs, and if it would spill down the sides and front of the oven. I suppose a large enough spill would go everywhere. I contacted GE via e-mail and asked about this, and approximately how much fluid would be contained on the glass surface (there is a raised edge on it to contain a spill), and their reply was to not spill anything???? Whatever. Anyway, we enjoy ours and is easier to clean then the coil ones.


Outbacker is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Flat roof on block of flats - rebuild advice Martinr Roofing and Siding 3 01-16-2009 10:26 AM
some kind of electric fireplace thermostat? Philphine HVAC 2 12-09-2008 03:13 PM
determining water heater size, and gas or electric? Philphine Plumbing Forum 4 12-08-2008 04:20 PM
Switching from oil to electric furnace sumat HVAC 3 12-04-2008 03:04 PM
Electric furnace vs gas furnace scottman1027 HVAC 6 02-10-2008 11:07 PM

Newest Threads

LATEST SPONSOR DEALS