DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Bricks, Masonry and Concrete > ? epoxy agg or decorative concrete over existing concrete - seeking advice

Thread Tools Search this Thread Display Modes
Old 04-16-2009, 09:40 PM  
Junior Member
Join Date: Apr 2009
Posts: 1
Default ? epoxy agg or decorative concrete over existing concrete - seeking advice

I live in Morrison, Colorado. Have existing ~ 600 sq ft concrete patio. Considering resurfacing - either exposed porous epoxy aggregate or a stamped concrete. Hoping not to remove existing concrete. Tough environment and want tough, minimal maintenance finish. Temperature ranges from -10 to very sunny 100 degrees.

Advice? Is an aggregate gonna stand up? Is stamped decorative concrete clearly tougher and lower maintenance?

thanks in advance. Mark

mmrradd is offline  
Reply With Quote
Old 04-18-2009, 05:09 PM  
Senior Member
Join Date: Mar 2006
Posts: 2,990
Liked 3 Times on 3 Posts

Send a message via AIM to glennjanie

Welcome Mark:
I would want an epoxy binder used and then add at least 2" of concrete of either kind. Either one will have a tendency to hide any cracks that may appear.

glennjanie is offline  
Reply With Quote
Old 04-20-2009, 04:08 AM  
Join Date: May 2008
Posts: 88

i don't know of any epoxy that's suitable for exterior use,,, resurfacing w/polymer-modified cement conc is our main work & we never use epoxies of any type outside.

colorado's not a particularly harsh environment for conc,,, if it were, there wouldn't be so much of it used for harsh, try 40degree swings in 12hrs when the conc'll be poppin' back & forth in size,,, knowing the trade, i'd opt for resurfacing OR acid-stain & seal,,,

typically you'll use 3,000 to 3,500 psi conc while the avg o'lay mtl's 5,000+,,, aggregate's stone so that's not an issue,,, stamp'd dec conc isn't 'clearly tougher OR lower maint',,, then again, its your home !

good luck !

ps - glenn suggests an epoxy-bond'd conc overlay,,, that is an acceptable method however any crks in the original conc will usually reflect in the upper course.
yesitsconcrete is offline  
Reply With Quote
Old 05-31-2009, 07:31 PM  
jimmy50's Avatar
Join Date: May 2009
Posts: 38
Default Decorative concrete

Can be made into a design you so chose. I am not sure about the epoxy. If the epoxy cracks afterward it may not show up as much as a crack in the decorative. Unless your installer can fix the crack without it showing up in the decorative concrete. Ask questions.
jimmy50 is offline  
Reply With Quote

aggregate, concrete refinish, decorative concrete, epoxy aggregate

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Seeking Advice re Color of Hardwood Floors - Dark or Light? RenoNewbie General Home Improvement Discussion 1 04-01-2009 06:31 PM
Need Advice on Filling low spot on Concrete Slab patio. DebbieG Bricks, Masonry and Concrete 4 06-03-2008 07:33 AM
Dry to Concrete Ron Murphy General Home Improvement Discussion 1 02-02-2008 07:37 AM
Greetings From Vancouver - Decorative Concrete garyjones Introductions 0 02-05-2007 03:47 PM
Concrete TxBuilder General Home Improvement Discussion 3 09-30-2006 10:56 PM

Newest Threads