Trying to replace a non-programmable TSTATCCPRH-01B with a programmable TP-PRH01 and I can't match the old connections with the new connections. The old connections do not match any configuration included in the original booklet. The thermidistat runs an FV4ANF005 Air Handler. The existing connections are as follows: S-2, B, C, W/W1, Y/Y2, G, R, O/W2. A total of 8 wires. The S-2 appears to match the OAT for the new unit. All the others match something, except the old B connection. The new unit has an O/B W2 connection and I am not sure if I should connect the old B and the old O/W2 both to the new O/B W2 connection or do something different? Any help anywhere?