DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > Hardy Board




Reply
 
Thread Tools Search this Thread Display Modes
Old 09-21-2009, 08:12 AM  
turbomangt
Junior Member
registry_dropdown_16507_34865
 
Join Date: Sep 2009
Posts: 5
Default Hardy Board

I ordered Hardy Board (pre finished) for my house, what should know about this product, I understand the install requires some real technical skill. checked other sources on line, and read some things that concern me. did I make a bad choice? Our current siding cedar is cracking spilitng and basically falling apart after 20 years, I thought this fiber cement was a good choice? we also elected to put 1/4" foam behind it for added insulation. Of course tyi vek would go on first. feedback welcome . gary


turbomangt is offline  
 
Reply With Quote
Old 09-21-2009, 05:40 PM  
oldognewtrick
Moderator
HRT_ADMIN.png
 
oldognewtrick's Avatar
registry_dropdown_15773_34877
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 6,953
Liked 675 Times on 552 Posts
Likes Given: 211

Default

Gary, I have used Hardy Planks on many siding installs with excellent success. Its a great product IF you install it correctly. Go to the MFG website and download the installation instructions and follow them, you shouldn't have any problems if you keep the material off the shingles so as to have an air space underneath, nail it in the proper locations and use the recommended fasteners.

There are 8 different climate zones that are zone specific for installation of vapor barriers and insulation requirements, check with your local codes dept to see what is required in your area. I wouldn't even begin to take on the liability of recommending what you should do because it seems to be a moving target with insulation and barriers.

Most stores that sell Hardy Board rent trimmers/nippers to cut the Hardy Board. Save yourself a lot of aggravation and rent the cutters.

Good luck with your project.


oldognewtrick is online now  
 
Reply With Quote
Old 09-22-2009, 05:42 AM  
turbomangt
Junior Member
registry_dropdown_16507_34889
 
Join Date: Sep 2009
Posts: 5
Default

Thank so much . I hired I contractor to do the work, sorry I didn;t make that clear, same guy that recommended IKO on my roof, now that its installed I heard about all the law suits against them...go figure....
turbomangt is offline  
 
Reply With Quote
Old 09-22-2009, 03:50 PM  
oldognewtrick
Moderator
HRT_ADMIN.png
 
oldognewtrick's Avatar
registry_dropdown_15773_34905
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 6,953
Liked 675 Times on 552 Posts
Likes Given: 211

Default

Gary, the biggest issue with the application of any material is installing it according to the MFG spec's. If it is installed incorrectly it can and most times will void the material warranty.
oldognewtrick is online now  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Board floor DonM Flooring 4 08-06-2009 04:45 PM
painting particle board? ylexot Painting Forum 1 02-27-2009 10:17 AM
New to the board Barry M Introductions 1 09-30-2007 07:51 PM
Making a light board ( basicly like a sound board) for studio colepittman Electrical and Wiring 0 08-04-2007 02:27 PM
Deck Board Gap cibula11 General Home Improvement Discussion 3 06-24-2007 11:26 AM

Newest Threads

LATEST SPONSOR DEALS