DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Flooring > rough lumber for flooring

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 01-08-2010, 11:12 PM  
Junior Member
Join Date: Jan 2010
Posts: 3
Default rough lumber for flooring

my wife and I are undergoing a major home remodel - everything will be changed some way. we are almost finished with the kitchen and want to put down hardwood flooring. I was told by a friend to look into using rough lumber for the floor, we want the antique/old country look to it. has anyone used rough lumber cut from a local saw mill as flooring? is this a good idea?

bennett1031 is offline  
Reply With Quote
Old 01-09-2010, 10:20 AM  
Bud Cline
Tile Contractor
Join Date: Apr 2006
Posts: 284

Sounds really charming but it's doubtful a local saw mill will have planks of a consistency needed for flooring. (Been down that road years ago with cottonwood.) Then there is the moisture issues.

Wood flooring manufacturers do however sell a product generally referred to as "cabin-grade" and is a more rugged product than the fine-finished stuff most people look for. The moisture issues won't be a problem, the thickness issues won't be a problem, the finish issues won't be a problem.
Bud Cline is offline  
Reply With Quote
Old 01-09-2010, 07:03 PM  
Emperor Penguin
Nestor_Kelebay's Avatar
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts



I think that the person who suggested using a rough sawn wood for your floor gave you terrible advice.

It might not have been bad advice if, as flooring manufacturer tend to believe, the only thing you might spill on your floor might be a glass of milk, or maybe Fido might have an accident on it. But, that's not the life of a real floor. A real floor has to put up with your kids making Easter Eggs and possibly spilling Easter Egg dye on your floor. Or perhaps blue Saniflush, or maybe something else that'll permanently stain the floor, like Kool-Aid.

Also, many woods have lots of tannin in them. Tannin reacts with iron ions to form a simple ink that was used in the middle ages called "Iron gall ink", and the only way to get an iron gall ink stain out of that wood would be with a belt sander. If, for example, you have iron feet on your fridge or stove, and you spill water on that floor so that the appliance feet start to rust, you will have black iron gall ink stains where the appliance feet were.

Often you see round black circles on hardwood floors, especially red oak flooring. That's caused by people over watering a plant. The water percolates through the soil and picks up iron ions along it's way. When it leaks out the bottom of the pot, the iron ions in the water react with the tannin in the wood (and red oak has lots of tannin in it) to form a round black mark the same diameter as the pot. And, the only thing that will get that black stain out is a belt sander. (Although some people claim you can get those stains out by making a concentrated bleach solution by dissolving swimming pool chlorine crystals (KOCl) in water until they don't dissolve any more.)

I think you should opt for hardwood floors in bedrooms where you walk around in stocking feet and seldom spill any water. A kitchen, with it's sink is a potential wet area, and every time you need to move the fridge or stove to do repairs, you're gonna be scratching up your hardwood floor.

Last edited by Nestor_Kelebay; 01-09-2010 at 07:07 PM.
Nestor_Kelebay is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Lumber strength Chris General Chit-Chat 13 09-01-2017 06:59 AM
LVL lumber tractng Framing and Foundation 6 05-14-2015 04:18 PM
Keeping the lumber dry remout General Home Improvement Discussion 3 04-27-2015 09:35 AM
outdoor lumber BryanB Carpentry and Woodworking 2 09-03-2009 12:54 PM
lumber dimensions Will Carpentry and Woodworking 13 07-07-2006 03:28 PM

Newest Threads