DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Appliance Discussion > Icemaker won't dispense ice, ran a small test already

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 08-08-2010, 11:14 PM  
Join Date: Jun 2010
Posts: 60
Liked 1 Times on 1 Posts
Likes Given: 46

Default Icemaker won't dispense ice, ran a small test already

Hi guys, I'm helping my mom fix her ice maker in her fridge. It just stopped making ice. It is for a kitchenaid fridge. The model number is: KSRG25FKWH01
It was made in 2001.

The thing is, if I fill the tray up with water, it will freeze the ice, and the ice won't come out. If I wait a few days, then the ice will simply have evaporated (it won't come out in the tray or anything, it may have melted again and just leaked out or evaporated). There was some dripping from the back of the freezer whenever I fill the ice tray up, but it stops and allows the water to freeze. So I don't know what's wrong.

Summary: If I fill the tray up with water, sometimes there is water dripping at the back of the freezer from inside. However, it will allow the water to freeze to form ice cubes. After a few days, the ice maker will not dispense the ice, it will stay in the tray. After a few more days, the ice will simply "dissappear" as if it re-melted and dripped away or evaporated. I have no clue if the icemaker itself is bad, or if there is a leak, or both.

amodoko is offline  
Reply With Quote
Old 08-09-2010, 11:02 AM  
oldognewtrick's Avatar
Join Date: Jul 2009
Location: Nashville, TN
Posts: 10,685
Liked 1383 Times on 1099 Posts
Likes Given: 405


Make sure that the water inlet is not frozen with a chunk of ice in it, keeping the water from filling up the tray. Had this happen to me.
oldognewtrick is offline  
Reply With Quote
Old 08-10-2010, 11:18 PM  
Senior Member
Join Date: Jul 2008
Location: Tuscaloosa, Al
Posts: 272
Liked 26 Times on 22 Posts


The wire bail has to make the switch where it moves inside the ice maker. Make sure it's hitting it. Try dropping the wire bail letting it drop hard to see if it will make the switch. You can make sure the switch works by checking it for continuity when it's depressed.

You can look inside the control module to see if the gears are locked up or missing teeth. The parts in your ice maker are replaceable if you can determine which you need. The control module is a common problem. Here is a link to a diagram and parts list of your ice maker based on your model number.

Ice maker, optional replacement parts for WHIRLPOOL KSRG25FKWH01 |
woodchuck is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
HVAC test questions coordinator HVAC 1 06-16-2010 03:03 PM
refig icemaker heat coil problem seismo1951 General Appliance Discussion 7 01-25-2009 09:14 PM
Gas line pressure test tonocats Plumbing Forum 6 09-30-2006 02:08 PM
kenmore icemaker speed needs adjusting rpmooney Introductions 1 07-20-2006 11:45 AM