Hi everyone 
I have an outdoor faucet that is not screwed onto the house. As I turn the tap on/off, the whole assembly rotates a bit, about 15 degrees. The piping in the house is PEX, so there is some flexibility.
Is this a concern, and does it need fixing?
Thanks a lot!
Paul
I have an outdoor faucet that is not screwed onto the house. As I turn the tap on/off, the whole assembly rotates a bit, about 15 degrees. The piping in the house is PEX, so there is some flexibility.
Is this a concern, and does it need fixing?
Thanks a lot!
Paul
