I just recently put a new flush kit in the tank of my toilet and now when I flush the toilet it does not flush right. It does not suck everything down that is in the bowl, and it did not do that with the old flush kit that I had in. Any ideas?
I have 240 volts coming out of the outlet so there is enough power there. So I plugged in the heater and turned it on and tested the volts in the heater and that read 240 volts so something must be wrong with the heater that I bought
I checked the outlet it is putting out 240v and everything is wired right, when I plugged it in again and turned it on the fan turned on and very heat started to come out but it was not blowing it out! I have about 25ft of the #10 wire going from the heater to 240 plug that I am plugging it...
I have recently purchased a garage 5000watt 240 volt heater from farm and fleet. It is calling for a 10-3 wire which I bought, I hooked the wiring up to the heater ran the wiring to the outlet about 25 ft. To the 220 outlet put a male end on it plugged it in turned it on and nothing! Anyone have...