Recent content by edlank

Check https://www.surpluscenter.com/Electric-Motors/DC-Gearmotors/DC-Gearmotors/

I am a little late in posting my solution. Tom at Ed Young's helped me. It is an Eljer 66011, and for the shower, I needed an Eljer 66021 and Eljer 66041 diverter.

NealTW, that was a good suggestion. On CCTVForum, I got my solution. I added the extension for Chrome "IE Tab" and using Chrome with that extension, it works again. It made no sense, since neither IE Explorer nor Chrome had worked, but nevertheless, with this, it does.

I have 2 heat pumps, and our Honeywell programmable thermostat stepwise raises the temperature, so I instantly go to auxiliary heat. When I last looked at replacements, I could not find any that would slowly ramp the temperature so we could set back the temperature and automatically raise it...

If there is a better chat room for this topic elsewhere, I would appreciate being told where. I had seen them before I bought camera this last fall, but my searches now find only corporate sites.

There was a notice on the FireFox web site about an interim solution for those sites that their update broke. I applied that FireFox add-in, and it did not help. With Chrome and IE, I have since I bought the camera seen the camera log in screen, where I am told to download a plug-in, but I...

I have a Honeywell H3D3PRV3 IP camera outside. It is wired, and supposed to be ONVIF compliant. It is used only to monitor the status of my driveway just outside my garage, which is a blind side of my house with the doors closed. I do not have any recorder, nor felt the need for one. It has...

You can suit yourself, but if it was cut once, it might be because it is much too shallow. When the previous owners told us about the landscaping lighting having one light not working because the wire "might" have been damaged, I decided not to use it until I checked it. I checked between the...

I appreciate the suggestions. So far, official company representatives say it is not Grohe, Rohl, or AquaBrass. I am still awaiting Young's answer.

I did. When unsuccessful, the hardware store had a better O-ring supply. I will send images to EdYoungs.

I know that this solid brass widespread faucet was expensive, and a replacement widespread of this quality will also be expensive. I prefer it retain the design that will continue to match the tub valve. From what I am seeing, it would take $250 to $500 to replace it. It would be hard...

That is slick, but it does not show me units that were sold in 1990. That is what I need.

I replaced the seat even though it looked good, and it made no difference. The water has always turned off just fine, but there is such little resistance to turning it that everyone feels like it must be turned more until it feels firm. After a year of this, the washer is smushed horribly. A...

Thanks, but I have done all of that years ago, with no change, and again recently, with no change. The plumbing parts man did not even think that he could get an exact replacement for the O-rings, making it seem that it might be metric. I had a hardware store with a larger selection than the...

I have a bathroom faucet I cannot identify in the house I bought. The house was built in 1990. The cold valve works well. The hot valve works, but requires ~3/4 to 1 full revolution of the stem to start getting water flow. It actually shuts off again with very little rotation, but with no...