PJB12's latest activity

Mine was taking forever, and it was the cover over the vent to keep birds out of my vent trapping lint. If the line is long, it could...

Affan, From the photo, I'm pretty confident that the stem can be removed by using an adjustable wrench, sometimes called a Crescent...

One would think so. I just bought an inspection camera with NiMh batteries. I have a 2 year old Porter Cable drill with NiCD. My...

On NiCd & NiMH, you can tap with a small 9 volt battery. It clears the dendrite crystals that build up. With safety eye wear on, tap...

Check the vent piping from the discharge end all the way to where the lint trap is inside the dryer. Lint builds up and the moisture...

All elec. appliances deteriorate, over time. They also have high/low limiting devices, and that would be my starting point. You might...

Check the lint trap.

I always wonder how the gas company gets away with the corrugated stainless steel tubing inside the building (my house, too) with no...

I'm curious about grounding them as well. My wife is a Realtor and often on inspection reports they'll have notes about the gas pipe...

Thank you - I will check the pressure on it and let you know. Worst case, I can just swap the tank if needed.

My neighbor blows the maple seeds & junk out of the tiny gaps on hers with an air compressor (and safety eye wear). Maybe that'll work...

If you're looking to increase the gap between your deck boards to prevent debris buildup and improve aesthetics, there are a few...

There are even Low VOC DIY tub refinishing kits on the market. How well they work, I don't know- but it might be worth looking into...

Why absolutely, you can refinish the tub, but please read the product instructions, and carefully follow them. Before you attempt the...

With diaphragm style tanks the Tap-To-Test method doesn't work well. Neither does feeling for a temperature difference. Those methods...