Steve123's latest activity

Is there supposed to be a screw that runs down from the top of the handle?

You possibly have plastic clips that mount over the mirror. Do a google search for "concealed mirror clips". The lower clips are...

From a Middle School online lesson - below : But it is important to note that there must be motion for work to have been performed. If...

No that concern is not realistic. My Armstrong manual specifically states to use a minimum MERV 11 filter.

That looks like somebody's home made solution. A couple of things that look strange are the proportions of the beam --- wide and short...

You seem to be leaving out some of the information. A professional engineer normally gives a written report, not just a verbal. What...

I am no expert, but it doesn't take an expert to know there should be a steel lintel over those windows. So those windows were a...

That dropped portion of your ceiling does not look structural. Probably, if you go in your attic, you will see the ceiling joists are...

Could also be Plan A on how to vent something. And Plan A didn't work out.

looks like a little screw on the bottom silver part. I would start there. Welcome to the forum.

House is 42 years old. Stuff happens. Lots of Youtube videos on how to fix cracks in plaster. I would probably go with paper tape...

The good solutions are not simple or cheap. I expect that you have reviewed many of them. (actually they would have been simple and...

If you put a long straight-edge on the interior block wall, is it still flat ? Anything noticeable on main floor such as cracks in...

I recall that in my area, load bearing capacity of the ground is typically between 1000 psf and 5000 psf if it is undisturbed soil...

Mini lathe can be handy. The biggest restriction, I find, is the size of the chuck and through hole. Bigger is better. Also, the...