Location,Location,Location is last year. Now its Price,Price,Price
But,
I recently worked on a property, It was purchased from a bank, we worked on it 14 days and it sold on the second open house 2 weeks later.
Tom
Safest way is to check the door manufactuer requirements .They will give you the opening size and header details for the spring. Do you need permits for this work in your area???
But to answer your Question.
Redhead the PT to the slab.
Tom
I would do nothing till or if he gets caught. Permit fines would be the same. If he used 6 nails per single and they were long enough..no problem. Just make sure he mudded the edge of the first row at the drip edge.
In my experience most home inspectors for insurance just check the life of the...
Yes Rustoleum makes the hammered finish thats designed to go over rusted metal {its written on the can so it must be true:rolleyes:no really, its good stuff}. comes in a few colors spray or cans
Tom
Yes as the other posters have said ..Check for active termites, and treat ..and use wood blocking to support the sub floor.I always use pressure treated lumber in infested areas of the home
Subterranean termites can move fast thru softer untreated wood.
Subs will never completely go away...
Why do I think the OP has manufactured home?..If he does then the flooring is composite board or plywood..
I use "Rock hard Water Putty" over wood as I find the cement based does not stick too well in my experience. Mix in a drywall mud pan and put down with a 6 or 9 inch taping knife.
My...
If the popcorn does not have too many coats of paint you should be able to get it all off the ceiling no problem..if this is the case then I would keep it flat.just patch any boo-boos , prime and paint.
If it has too much paint then you will not get if all off..then it would be best to get as...