Search results

Thanks for the replies. The jamb is undercut. The tile is going into the jamb at an angle. I can see why it is confusing. Part of the cut looks like it is for the stop. Sorry. Beachguy: I was noticing that as they broke. I could put tile back together and joint was almost invisible. Thanks...

This tile is wrapping a door jamb on both sides. The cut is outlined in black, The inside is waste. This is a 12"x12" ceramic tile. I can't get to everything with a wet saw. For that stuff I've tried using a 4" diamond blade on a grinder. Tile always breaks. I take it slow. I've layered...

Last night unit stop working. I took thermostat cover off and touch red to green. Nothing. With wires still touching I went up in attic and removed fuses and replace after 5 minutes, unit immediately came on. Looks like its the relay in the board. How do I check power going to the motor? Pull...

yes dried all the way through. I used CLR, it soften the paint up and use a bunch of different tools to clean out.

Hi, I bought a used 509 Wagner Professional Airless paint sprayer at a auction. The previous owner used in a cabinet shop. Besides the motor, I am taking the unit apart to service, basically get rid of all the dried paint, remove rust, clean the springs, etc. The previous owner did not...

thank you all for great advice. I will try this suggestions. I get one day off every two weeks, so when i get time I'm gonna do these things

Cool. Thanks for quick reply. Does a bad winding mean I would need a new motor? About how much would that board be if the board needs replace?

I have a Carrier air handler and a Bryant compressor/air conditioner about 6 years old that supplies cool or warm air to the second floor. When I turn on my thermostat to cool the air handler will not blow air. The compressor will come on and the evaporator coil and refrigerant lines are very...

Is there a EZ trap overflow sensor. If this gets tripped turns off condenser. To fix: make sure trap free of obstruction, can pour water through and confirm drains outside, make sure float is not raised, if good then pull breakers to reset system.