Search results

they are screw in , try to lift up and then turn counter clockwise, then replace with new pop up toe tap plug

I agree with B , if you have a check valve or closed water system water in the tank will expand 1/23 what that means for every 23 gallons of cold water after heating you will have 24 gallons.

the old fashioned cast iron rads, where very efficient, they need just a water temp of 140 f to deliver heat , the thin line rads need a water temp of about 180 - 200 f to deliver the same amount of heat. I do not know how many service calls i have been on where some renovator installed new thin...

turn of the water to the house and drain completely, the heat the stops to almost red hot , use two wrenches , it should come apart

it is very important to open a window or two when using a fireplace. most houses have all matter of exhaust devices (dryers ,bathroom exhaust, kitchen hoods ect )but nothing coming in so the house has a negative pressure .

this old house how to

just take the hose from the washer and connect both ends

it is a rona which is a lumber yard company that has saws made in their name. https://www.rona.ca/en/building-supplies

the one feature that i realy like on my saw is a laser beam to make long straight cuts ,

as electric motors get older the insulation starts to break down. most compressors are guaranteed for 5 years . Electric motors draw 10 times their normal current when starting . I assume this is a central unit of 3-5 ton ?

local by laws where i live say your downspout must direct the water on to your property .

funny my owners manuel says it is ok

in my area the insurance companies do hire the contractors and over see the repairs

You can use what ever you want in summer use a heavier oil and in winter very light oil.

Be careful some municipalities will not allow this . I heard that one homeowner did this and the water Was sent to the street and then froze causing an accident that ended up in court.

Why not report this to your insurance company . They are far most skilled at this than you, you have to pay your deductible, that is all

I would charge between 3-5 grand depending on local conditions, permits, cost of delivered concrete, local labour charges per hour . i see three men one full day.

i bough a Samsung frig , it had a panel in the freezer that looked like one could by a add on ice maker, the salesman said i could install one . I got the frig and ordered the icemaker from amazon and the solenoid valve . I tried several times to install it no way. I called Samsung several...

in canada with very cheap hydro electic rates 6.45 cents per kilowatt hour it would be electic baseboards .

i am a retired inspector, i would not accept this work also i would go after this so called plumber for doing work without a plumbing license. the work is very poorly done