Recent content by coachgeo

:o Learn something new everyday Thanks

hmmm...... now wuzaat the "F" and "h" in the last formula:p

Thanks for the info. Good point on the thermal mass. A radiant heater of some type might be good on top of an LP type as a fill in to get that mass warmed to help maintain the heat more efficiently.

Coat them with roll on truck bed liner- DONE

course on the same lines...... a trap door to reach the crawl space for maintenance would be a nice feature. Easier than crawling under thru tiny opening outside.

Pier and beam home. Drop things under the floor boards for max space use in a tiny almost Micro home. What is your thoughts? How would one construct this? Prevent moisture issues?? Small storage between floor joist...... not so hard to figure out...... but a . bed? . bathtub? . Washing...

Add a solar water heating unit to add heat to stored water? The in line would then only be needed to bring it up to max temp if it is not there already? Would not save space except you could lay the water storage tank down horizontal. Would save on $$$ IMHO

My bad.:o:hide:...... your correct:trophy:

sounds like inefficient chimney draft on the wood stove allowing for smoke to get into the room. How long has it been since you cleaned the chimney?

This is a tiny log cabin with 12x16 foot of total space. 4" thick logs so it should have a nice R value total. It was built to be moved by truck so it is on 1/2 a mobile home chassis. The plastic lining and insulation below the floor needs redoing so that opens the option of Radiant floor...

prescribed........ look forward to updates. Want to vault in my old home too.

Im with NealTW. Far as I know there is no Lead in the Galvanization process nor in the Tin itself.

Additional good info in this one. Had not seen it yet. Thanks. Actually the link inside the article was more informative: http://cottagedreamers.blogspot.com/2010/02/we-started-our-shower-surround-project.html?showComment=1381021021747#c4145658238947137872

While it has an electric cook top now........ I did consider swapping to a LP unit. I was given an LP unit w/stove that needs repair. Presently there is an apartment sized fridge under cook top but could move this over onto counter on other side you don't have to stoop ...... which would open...

Budget is not fitting anything fancy...... it is either grungy looking old corrugated metal (for cost and aesthetics) or new stuff which does sit in the price range. Anything fancier AKA powder coated etc. is not in the price range. you speak true Kemosabe. I'm open to suggestions. One thought...