jean862

Thank you - I will check the pressure on it and let you know. Worst case, I can just swap the tank if needed.

With diaphragm style tanks the Tap-To-Test method doesn't work well. Neither does feeling for a temperature difference. Those methods...

Hi Paul/ Everyone. Hope everyone is doing good. Paul - I did check the tank and I believe its almost to the end of its life. The top...

The indicator cap's is handy, isn't it? (Amtrol, I'm guessing) But, it'll only show you if the diaphragm is allowing water into the air...

Yes most of the problem is resolved. Thanks to all of you on here. I did install 3 access panels. one 16x18 for the toilet just in case...

I checked the tank, and it seems to be in working condition. The valve under it is clear and white. According to the instructions...

Thank you Ekrig and Paul. I will check that tank and follow the directions you've posted. If everything goes well, then I can higher the...

Thank you Everyone for taking the time to help me with this. I added two water arrestors on the line under the sink and another two...

I took the pressure this morning and it was reading 70 psi on the cold side. I dropped the whole house to 45 psi, but the pipes behave...

Hi, I just re-checked this. And yes, the pipes still bang as loud as they were originally. The first time, I probably slowly closed...

Thank you Snoonyb. I'll reach out to the city now to see if they can help answer that question.

Hi, I did the test this morning but it doesn't syphon. While the water is on upstairs, the noise in the wall was hardly noticeable once...

Thank you, I will try to adjust the pressure all together to see if that resolves my issue before I go and change the piping and open...

Hi, Thank you for your quick response. I installed brackets to hold the pipes firmly and there aren't any movement in the back of the...

Check your incoming water pressure at a spigot outside your house. They screw on the hose bib, and cost about $12. This will tell alot...