I am trying to locate a shower drain fitting but having no luck. Been to all the local stores and have done an exhaustive search online with no results. It is the weekend so I can't call a plumbing supply house for help, thought I would try here.
I have a shower setup that isn't the normal way so I have to improvise. For whatever reason when they built this house 40 years ago they put the shower drain about 2 1/2 feet from the commode. I removed a cheap square 32" shower stall that sat on a raised tray and the drain was plumbed over to the cast iron pipe in the concrete. This is in a basement. I am putting in a corner shower stall but the drain isn't anywhere near the shower base drain opening. I am using a masonry blade in my circular saw and air chisel with my compressor to make a trench in the concrete to lower the plumbing down enough to fit under the new shower base.
I am trying to replace this fitting because I tore it up removing the old shower stall. The fitting has a 2" threaded opening that attached to the shower drain and a horizontally located 1 1/2" non threaded opening for pvc pipe. On the bottom of the fitting it says, "PVC-DWV NO.82.305 WHITE US Patent NO. 3895398. I searched on google with these numbers with no luck as well.
If anyone has any idea what this thing is called or where I could get one please let me know. Pictures provided below...
Jeff
I have a shower setup that isn't the normal way so I have to improvise. For whatever reason when they built this house 40 years ago they put the shower drain about 2 1/2 feet from the commode. I removed a cheap square 32" shower stall that sat on a raised tray and the drain was plumbed over to the cast iron pipe in the concrete. This is in a basement. I am putting in a corner shower stall but the drain isn't anywhere near the shower base drain opening. I am using a masonry blade in my circular saw and air chisel with my compressor to make a trench in the concrete to lower the plumbing down enough to fit under the new shower base.
I am trying to replace this fitting because I tore it up removing the old shower stall. The fitting has a 2" threaded opening that attached to the shower drain and a horizontally located 1 1/2" non threaded opening for pvc pipe. On the bottom of the fitting it says, "PVC-DWV NO.82.305 WHITE US Patent NO. 3895398. I searched on google with these numbers with no luck as well.
If anyone has any idea what this thing is called or where I could get one please let me know. Pictures provided below...
Jeff