slownsteady
Well-Known Member
I'm about to do a small project where I will put a piece of Hardie Panel under a window where siding used to be. I haven't worked with the stuff before, so a couple of quick questions:
If I'm only going to make a handful of cuts, how important is it to use a Hardie blade on my circ. saw? Can I get away with a standard blade or even a plywood blade?
I understand that cut edges need to be primed. Is there a recommended primer to use? A specialty product?
If I'm only going to make a handful of cuts, how important is it to use a Hardie blade on my circ. saw? Can I get away with a standard blade or even a plywood blade?
I understand that cut edges need to be primed. Is there a recommended primer to use? A specialty product?