blainekehl
New Member
- Joined
- Feb 18, 2015
- Messages
- 2
- Reaction score
- 0
I am finishing the laundry room in my basement. I have a 10 foot drain pipe running along a concrete outside wall. I will be replacing this drain pipe. I need to frame the wall this pipe is running along. It's a 2 inch pipe about an inch from the wall. I was going to use 2x4 studs but I'm not sure how to account for the drain pipe. Should I run the pipe and notch all the 2x4s? Frame the wall and bore holes in the 2x4s to run the drain through? Should I use 2x6 instead? This is not a load bearing wall.
Any ideas would be great!
Any ideas would be great!