I recently installed a new set of bathroon cabinentry and counter top, the sink is now located in a new position and the sink drain is no longer aligned with the waste line coming out of the wall. The waste line cannot be move to a closer position with respect to the sink drain pipe/"P" trap. My problem is that with the "P" Trap 90 degrees off a line running from the sink drain to the wall it is still 1/2" shy of reaching the waste pipe coming out of the wall. Is there a pipe that can be made to order that can be directly connected to the "P" Trap that has the correct angle to allow for the pieces to align. I have tried both 45 and 33 degree joiners and they require too much room to install.
kevin
kevin