havasu Administrator Staff member Admin Moderator Joined May 20, 2010 Messages 5,325 Reaction score 1,375 Nov 14, 2022 #21 Bent bar, pinched gears, bad bearings or roller guides.
S swimmer_spe Well-Known Member Joined Apr 29, 2015 Messages 944 Reaction score 175 Nov 24, 2022 #22 OP here with an update. The bar is fine, but had some sawdust in the groove. The chain was missing a few rakes too. Cleaned the bar, and switched out the chain and ran good.
OP here with an update. The bar is fine, but had some sawdust in the groove. The chain was missing a few rakes too. Cleaned the bar, and switched out the chain and ran good.
havasu Administrator Staff member Admin Moderator Joined May 20, 2010 Messages 5,325 Reaction score 1,375 Nov 24, 2022 #23 Good to hear!
RedneckGrump Supporting Member Supporting Member Joined Sep 2, 2022 Messages 544 Reaction score 605 Location Brockville, Ontario Nov 24, 2022 #24 Right on, GREAT to see your saw is up and going again!!