Hello Folks,
I am about to replace many sections of drywall, but after removing the damaged/old drywall and making it square and with proper support I found out nailed metallic corner beads at every corner and even surrounding windows jambs as shown below:
I have tried to pull out all of nails, etc, but in this case it seems that the corner bead was folded inside the windows jambs or extension jambs as depicted below:
In other situations there is corner bead present and I don't want to damage the drywall on the other side of the corner but it seems rather difficult to the pull out the nails from both side without damaging both sides and thus having to replace or patch more drywall than intended.
Thanks for any insights
I am about to replace many sections of drywall, but after removing the damaged/old drywall and making it square and with proper support I found out nailed metallic corner beads at every corner and even surrounding windows jambs as shown below:
I have tried to pull out all of nails, etc, but in this case it seems that the corner bead was folded inside the windows jambs or extension jambs as depicted below:
In other situations there is corner bead present and I don't want to damage the drywall on the other side of the corner but it seems rather difficult to the pull out the nails from both side without damaging both sides and thus having to replace or patch more drywall than intended.
Thanks for any insights