that using long lengths of extension cords can create problems.
I am planning on putting a upright freezer in my garage. The preferred place is 10-12 ft from the closest outlet.
Would this present any problems or concerns?
Thanks for all the suggestions.. The garage is unheated but usually is above freezing, I am in southern Ontario.First we don't know where you live and if your garage is heated. I personally don't like freezers in garages in northern climates as they seem to have problems working properly.
If you do put it out there and follow the advice to put in a new outlet for this. If the garage is unfinished it is very simple if it is finished it still is pretty simple to do.
Do not cut and splice and solder the wires as suggested.
If you want to do the extension cord idea go to the hardware or home improvement store and tell them you want to make a heavy duty 12' extension cord. they will sell you proper wire a box, cover clamp, outlet and plug. will take 15 minutes to put together. Don't run it anyplace you walk over.
It's not the wire resistance that is the problem with extension cords and high current draw appliances. It's the contact resistance between plugs and sockets so those are what you want to minimize.proper wire a box, cover clamp, outlet and plug. will take 15 minutes to put together.
It's not the wire resistance that is the problem with extension cords and high current draw appliances. It's the contact resistance between plugs and sockets so those are what you want to minimize.
Do not make your own cord, in this case.
Mr. 16415, bone up on "contact resistance".
The back-stabbed receptacles were a good example of this problem. As are old receptacles that have lost their spring temper. As is a loose car battery clamp.
Enter your email address to join: