I had a contractor remodel our guest bath and yesterday they put up the frameless door/panels for the shower.
After he left, I noticed a few gaps in the panels against the wall, the door doesnt seem flush and the bottom seems slightly off.
I have attached some pictures for reference. The contractor is suppose to come back and take a look at the gaps, but I would like a second set of eyes to give me some insight as to why this is happening.
**not sure why the site is turning the pictures sideways, but the ones with the paper are the side panels.**
Any suggestions or advice is greatly appreciated.
After he left, I noticed a few gaps in the panels against the wall, the door doesnt seem flush and the bottom seems slightly off.
I have attached some pictures for reference. The contractor is suppose to come back and take a look at the gaps, but I would like a second set of eyes to give me some insight as to why this is happening.
**not sure why the site is turning the pictures sideways, but the ones with the paper are the side panels.**
Any suggestions or advice is greatly appreciated.
Last edited by a moderator: