So I installed new doors and windows on an existing first floor . I did this after the place was drywalled , wall thickness varies it spots , and the new windows are smaller than the old ones to save moNey from having to go custom.
I'm going to try and do these one at a time to avoid confusion. First I'll ask about this new door . I pulled out a window and installed this door in the master bedroom . The exierior sheeting was almost an inch thick so the framed , which I believe should be flush with the drywall , is recessed . How to I make this look good?
Also , you can see the weather stripping is not sealing . It's at the top and bottom , the middle is fine . What's up with that?
I'm going to try and do these one at a time to avoid confusion. First I'll ask about this new door . I pulled out a window and installed this door in the master bedroom . The exierior sheeting was almost an inch thick so the framed , which I believe should be flush with the drywall , is recessed . How to I make this look good?
Also , you can see the weather stripping is not sealing . It's at the top and bottom , the middle is fine . What's up with that?