jmschreck56
New Member
- Joined
- Feb 3, 2015
- Messages
- 2
- Reaction score
- 0
I overloaded the circuit when I forgot and plugged in the vacuum on this circuit. It's a GFCI protected circuit with 3 bathroom, 2 laundry room, an outside outlet (covered) and an wet bar area converted to an entertainment center that has 2 outlets. All outlets are grounded. The GFI did not actually trip but I couldn't get power. The GFCI outlet works. I have replaced the GFCI outlet , then circuit breaker thinking it had to be one of them. Still no power to the load terminals. I finally bypassed the GFCI outlet and twisted the load and line hot and neutrals (separately and capped) to see if that would provide any power so I could maybe isolate the problem - still no power - I have the circuit breaker off and I'm looking for any suggestions. Thanks