Eddie_T
Well-Known Member
- Joined
- Feb 16, 2015
- Messages
- 3,386
- Reaction score
- 3,296
I am pondering making this track saw jig. Basically my immediate need is to cut drawer box sides and ends and bottoms from scrap wood. I have a RAS but that requires one straight edge before ripping plus ripping is not the easiest task with sheet goods or scrap. This jig seems like it would be ready for use w/o the setup required for the RAS plus I like to work outside where sawdust is not a problem. I have tried guides and clamped on fences and I usually manage to mess up at least one cut. This jig appears to solve that problem.